[PATCH v2 12/15] power: reset: oxnas-restart: remove obsolete restart driver
Neil Armstrong
neil.armstrong at linaro.org
Fri Jun 30 09:58:37 PDT 2023
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 restart feature.
Acked-by: Sebastian Reichel <sebastian.reichel at collabora.com>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
Acked-by: Arnd Bergmann <arnd at arndb.de>
Acked-by: Daniel Golle <daniel at makrotopia.org>
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
drivers/power/reset/Kconfig | 7 --
drivers/power/reset/Makefile | 1 -
drivers/power/reset/oxnas-restart.c | 233 ------------------------------------
3 files changed, 241 deletions(-)
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index fff07b2bd77b..59e1ebb7842e 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -148,13 +148,6 @@ config POWER_RESET_ODROID_GO_ULTRA_POWEROFF
help
This driver supports Power off for Odroid Go Ultra device.
-config POWER_RESET_OXNAS
- bool "OXNAS SoC restart driver"
- depends on ARCH_OXNAS
- default MACH_OX820
- help
- Restart support for OXNAS/PLXTECH OX820 SoC.
-
config POWER_RESET_PIIX4_POWEROFF
tristate "Intel PIIX4 power-off driver"
depends on PCI
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index d763e6735ee3..a95d1bd275d1 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
obj-$(CONFIG_POWER_RESET_LINKSTATION) += linkstation-poweroff.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
-obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o
obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
obj-$(CONFIG_POWER_RESET_ODROID_GO_ULTRA_POWEROFF) += odroid-go-ultra-poweroff.o
diff --git a/drivers/power/reset/oxnas-restart.c b/drivers/power/reset/oxnas-restart.c
deleted file mode 100644
index 13090bec058a..000000000000
--- a/drivers/power/reset/oxnas-restart.c
+++ /dev/null
@@ -1,233 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0)
-/*
- * oxnas SoC reset driver
- * based on:
- * Microsemi MIPS SoC reset driver
- * and ox820_assert_system_reset() written by Ma Hajun <mahaijuns at gmail.com>
- *
- * Copyright (c) 2013 Ma Hajun <mahaijuns at gmail.com>
- * Copyright (c) 2017 Microsemi Corporation
- * Copyright (c) 2020 Daniel Golle <daniel at makrotopia.org>
- */
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/notifier.h>
-#include <linux/mfd/syscon.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/regmap.h>
-
-/* bit numbers of reset control register */
-#define OX820_SYS_CTRL_RST_SCU 0
-#define OX820_SYS_CTRL_RST_COPRO 1
-#define OX820_SYS_CTRL_RST_ARM0 2
-#define OX820_SYS_CTRL_RST_ARM1 3
-#define OX820_SYS_CTRL_RST_USBHS 4
-#define OX820_SYS_CTRL_RST_USBHSPHYA 5
-#define OX820_SYS_CTRL_RST_MACA 6
-#define OX820_SYS_CTRL_RST_MAC OX820_SYS_CTRL_RST_MACA
-#define OX820_SYS_CTRL_RST_PCIEA 7
-#define OX820_SYS_CTRL_RST_SGDMA 8
-#define OX820_SYS_CTRL_RST_CIPHER 9
-#define OX820_SYS_CTRL_RST_DDR 10
-#define OX820_SYS_CTRL_RST_SATA 11
-#define OX820_SYS_CTRL_RST_SATA_LINK 12
-#define OX820_SYS_CTRL_RST_SATA_PHY 13
-#define OX820_SYS_CTRL_RST_PCIEPHY 14
-#define OX820_SYS_CTRL_RST_STATIC 15
-#define OX820_SYS_CTRL_RST_GPIO 16
-#define OX820_SYS_CTRL_RST_UART1 17
-#define OX820_SYS_CTRL_RST_UART2 18
-#define OX820_SYS_CTRL_RST_MISC 19
-#define OX820_SYS_CTRL_RST_I2S 20
-#define OX820_SYS_CTRL_RST_SD 21
-#define OX820_SYS_CTRL_RST_MACB 22
-#define OX820_SYS_CTRL_RST_PCIEB 23
-#define OX820_SYS_CTRL_RST_VIDEO 24
-#define OX820_SYS_CTRL_RST_DDR_PHY 25
-#define OX820_SYS_CTRL_RST_USBHSPHYB 26
-#define OX820_SYS_CTRL_RST_USBDEV 27
-#define OX820_SYS_CTRL_RST_ARMDBG 29
-#define OX820_SYS_CTRL_RST_PLLA 30
-#define OX820_SYS_CTRL_RST_PLLB 31
-
-/* bit numbers of clock control register */
-#define OX820_SYS_CTRL_CLK_COPRO 0
-#define OX820_SYS_CTRL_CLK_DMA 1
-#define OX820_SYS_CTRL_CLK_CIPHER 2
-#define OX820_SYS_CTRL_CLK_SD 3
-#define OX820_SYS_CTRL_CLK_SATA 4
-#define OX820_SYS_CTRL_CLK_I2S 5
-#define OX820_SYS_CTRL_CLK_USBHS 6
-#define OX820_SYS_CTRL_CLK_MACA 7
-#define OX820_SYS_CTRL_CLK_MAC OX820_SYS_CTRL_CLK_MACA
-#define OX820_SYS_CTRL_CLK_PCIEA 8
-#define OX820_SYS_CTRL_CLK_STATIC 9
-#define OX820_SYS_CTRL_CLK_MACB 10
-#define OX820_SYS_CTRL_CLK_PCIEB 11
-#define OX820_SYS_CTRL_CLK_REF600 12
-#define OX820_SYS_CTRL_CLK_USBDEV 13
-#define OX820_SYS_CTRL_CLK_DDR 14
-#define OX820_SYS_CTRL_CLK_DDRPHY 15
-#define OX820_SYS_CTRL_CLK_DDRCK 16
-
-/* Regmap offsets */
-#define OX820_CLK_SET_REGOFFSET 0x2c
-#define OX820_CLK_CLR_REGOFFSET 0x30
-#define OX820_RST_SET_REGOFFSET 0x34
-#define OX820_RST_CLR_REGOFFSET 0x38
-#define OX820_SECONDARY_SEL_REGOFFSET 0x14
-#define OX820_TERTIARY_SEL_REGOFFSET 0x8c
-#define OX820_QUATERNARY_SEL_REGOFFSET 0x94
-#define OX820_DEBUG_SEL_REGOFFSET 0x9c
-#define OX820_ALTERNATIVE_SEL_REGOFFSET 0xa4
-#define OX820_PULLUP_SEL_REGOFFSET 0xac
-#define OX820_SEC_SECONDARY_SEL_REGOFFSET 0x100014
-#define OX820_SEC_TERTIARY_SEL_REGOFFSET 0x10008c
-#define OX820_SEC_QUATERNARY_SEL_REGOFFSET 0x100094
-#define OX820_SEC_DEBUG_SEL_REGOFFSET 0x10009c
-#define OX820_SEC_ALTERNATIVE_SEL_REGOFFSET 0x1000a4
-#define OX820_SEC_PULLUP_SEL_REGOFFSET 0x1000ac
-
-struct oxnas_restart_context {
- struct regmap *sys_ctrl;
- struct notifier_block restart_handler;
-};
-
-static int ox820_restart_handle(struct notifier_block *this,
- unsigned long mode, void *cmd)
-{
- struct oxnas_restart_context *ctx = container_of(this, struct
- oxnas_restart_context,
- restart_handler);
- u32 value;
-
- /*
- * Assert reset to cores as per power on defaults
- * Don't touch the DDR interface as things will come to an impromptu
- * stop NB Possibly should be asserting reset for PLLB, but there are
- * timing concerns here according to the docs
- */
- value = BIT(OX820_SYS_CTRL_RST_COPRO) |
- BIT(OX820_SYS_CTRL_RST_USBHS) |
- BIT(OX820_SYS_CTRL_RST_USBHSPHYA) |
- BIT(OX820_SYS_CTRL_RST_MACA) |
- BIT(OX820_SYS_CTRL_RST_PCIEA) |
- BIT(OX820_SYS_CTRL_RST_SGDMA) |
- BIT(OX820_SYS_CTRL_RST_CIPHER) |
- BIT(OX820_SYS_CTRL_RST_SATA) |
- BIT(OX820_SYS_CTRL_RST_SATA_LINK) |
- BIT(OX820_SYS_CTRL_RST_SATA_PHY) |
- BIT(OX820_SYS_CTRL_RST_PCIEPHY) |
- BIT(OX820_SYS_CTRL_RST_STATIC) |
- BIT(OX820_SYS_CTRL_RST_UART1) |
- BIT(OX820_SYS_CTRL_RST_UART2) |
- BIT(OX820_SYS_CTRL_RST_MISC) |
- BIT(OX820_SYS_CTRL_RST_I2S) |
- BIT(OX820_SYS_CTRL_RST_SD) |
- BIT(OX820_SYS_CTRL_RST_MACB) |
- BIT(OX820_SYS_CTRL_RST_PCIEB) |
- BIT(OX820_SYS_CTRL_RST_VIDEO) |
- BIT(OX820_SYS_CTRL_RST_USBHSPHYB) |
- BIT(OX820_SYS_CTRL_RST_USBDEV);
-
- regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
-
- /* Release reset to cores as per power on defaults */
- regmap_write(ctx->sys_ctrl, OX820_RST_CLR_REGOFFSET,
- BIT(OX820_SYS_CTRL_RST_GPIO));
-
- /*
- * Disable clocks to cores as per power-on defaults - must leave DDR
- * related clocks enabled otherwise we'll stop rather abruptly.
- */
- value = BIT(OX820_SYS_CTRL_CLK_COPRO) |
- BIT(OX820_SYS_CTRL_CLK_DMA) |
- BIT(OX820_SYS_CTRL_CLK_CIPHER) |
- BIT(OX820_SYS_CTRL_CLK_SD) |
- BIT(OX820_SYS_CTRL_CLK_SATA) |
- BIT(OX820_SYS_CTRL_CLK_I2S) |
- BIT(OX820_SYS_CTRL_CLK_USBHS) |
- BIT(OX820_SYS_CTRL_CLK_MAC) |
- BIT(OX820_SYS_CTRL_CLK_PCIEA) |
- BIT(OX820_SYS_CTRL_CLK_STATIC) |
- BIT(OX820_SYS_CTRL_CLK_MACB) |
- BIT(OX820_SYS_CTRL_CLK_PCIEB) |
- BIT(OX820_SYS_CTRL_CLK_REF600) |
- BIT(OX820_SYS_CTRL_CLK_USBDEV);
-
- regmap_write(ctx->sys_ctrl, OX820_CLK_CLR_REGOFFSET, value);
-
- /* Enable clocks to cores as per power-on defaults */
-
- /* Set sys-control pin mux'ing as per power-on defaults */
- regmap_write(ctx->sys_ctrl, OX820_SECONDARY_SEL_REGOFFSET, 0);
- regmap_write(ctx->sys_ctrl, OX820_TERTIARY_SEL_REGOFFSET, 0);
- regmap_write(ctx->sys_ctrl, OX820_QUATERNARY_SEL_REGOFFSET, 0);
- regmap_write(ctx->sys_ctrl, OX820_DEBUG_SEL_REGOFFSET, 0);
- regmap_write(ctx->sys_ctrl, OX820_ALTERNATIVE_SEL_REGOFFSET, 0);
- regmap_write(ctx->sys_ctrl, OX820_PULLUP_SEL_REGOFFSET, 0);
-
- regmap_write(ctx->sys_ctrl, OX820_SEC_SECONDARY_SEL_REGOFFSET, 0);
- regmap_write(ctx->sys_ctrl, OX820_SEC_TERTIARY_SEL_REGOFFSET, 0);
- regmap_write(ctx->sys_ctrl, OX820_SEC_QUATERNARY_SEL_REGOFFSET, 0);
- regmap_write(ctx->sys_ctrl, OX820_SEC_DEBUG_SEL_REGOFFSET, 0);
- regmap_write(ctx->sys_ctrl, OX820_SEC_ALTERNATIVE_SEL_REGOFFSET, 0);
- regmap_write(ctx->sys_ctrl, OX820_SEC_PULLUP_SEL_REGOFFSET, 0);
-
- /*
- * No need to save any state, as the ROM loader can determine whether
- * reset is due to power cycling or programatic action, just hit the
- * (self-clearing) CPU reset bit of the block reset register
- */
- value =
- BIT(OX820_SYS_CTRL_RST_SCU) |
- BIT(OX820_SYS_CTRL_RST_ARM0) |
- BIT(OX820_SYS_CTRL_RST_ARM1);
-
- regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
-
- pr_emerg("Unable to restart system\n");
- return NOTIFY_DONE;
-}
-
-static int ox820_restart_probe(struct platform_device *pdev)
-{
- struct oxnas_restart_context *ctx;
- struct regmap *sys_ctrl;
- struct device *dev = &pdev->dev;
- int err = 0;
-
- sys_ctrl = syscon_node_to_regmap(pdev->dev.of_node);
- if (IS_ERR(sys_ctrl))
- return PTR_ERR(sys_ctrl);
-
- ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
- if (!ctx)
- return -ENOMEM;
-
- ctx->sys_ctrl = sys_ctrl;
- ctx->restart_handler.notifier_call = ox820_restart_handle;
- ctx->restart_handler.priority = 192;
- err = register_restart_handler(&ctx->restart_handler);
- if (err)
- dev_err(dev, "can't register restart notifier (err=%d)\n", err);
-
- return err;
-}
-
-static const struct of_device_id ox820_restart_of_match[] = {
- { .compatible = "oxsemi,ox820-sys-ctrl" },
- {}
-};
-
-static struct platform_driver ox820_restart_driver = {
- .probe = ox820_restart_probe,
- .driver = {
- .name = "ox820-chip-reset",
- .of_match_table = ox820_restart_of_match,
- },
-};
-builtin_platform_driver(ox820_restart_driver);
--
2.34.1
More information about the linux-arm-kernel
mailing list