[PATCH v4 19/21] firmware: scm: Modify only the download bits in TCSR register

Mukesh Ojha quic_mojha at quicinc.com
Fri Jun 30 07:57:53 PDT 2023



On 6/28/2023 8:50 PM, Konrad Dybcio wrote:
> On 28.06.2023 14:34, Mukesh Ojha wrote:
>> CrashDump collection is based on the DLOAD bit of TCSR register.
>> To retain other bits, we read the register and modify only the
>> DLOAD bit as the other bits have their own significance.
>>
>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
>> Signed-off-by: Mukesh Ojha <quic_mojha at quicinc.com>
>> ---
>>   drivers/firmware/qcom_scm.c | 12 ++++++++++--
>>   1 file changed, 10 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
>> index 104d86e49b97..a9ff77d16c42 100644
>> --- a/drivers/firmware/qcom_scm.c
>> +++ b/drivers/firmware/qcom_scm.c
>> @@ -30,6 +30,11 @@ module_param(download_mode, bool, 0);
>>   #define SCM_HAS_IFACE_CLK	BIT(1)
>>   #define SCM_HAS_BUS_CLK		BIT(2)
>>   
>> +#define QCOM_DOWNLOAD_FULLDUMP		 0x1
>> +#define QCOM_DOWNLOAD_NODUMP		 0x0
>> +#define QCOM_DOWNLOAD_MODE_SHIFT	   4
>> +#define QCOM_DOWNLOAD_MODE_MASK		0x30
> GENMASK and then FIELD_PREP below?

Just checked about FIELD_PREP, it works, thanks.

FIELD_PREP(GENMASK(5, 4), QCOM_DOWNLOAD_FULLDUMP)
FIELD_PREP(GENMASK(5, 4), QCOM_DOWNLOAD_NODUMP)

-Mukesh

> 
>> +
>>   struct qcom_scm {
>>   	struct device *dev;
>>   	struct clk *core_clk;
>> @@ -440,6 +445,7 @@ static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
>>   static void qcom_scm_set_download_mode(bool enable)
>>   {
>>   	bool avail;
>> +	int val;
> What's wrong with initializing it in the same line as ret?
> 
>>   	int ret = 0;
>>   
>>   	avail = __qcom_scm_is_call_available(__scm->dev,
>> @@ -448,8 +454,10 @@ static void qcom_scm_set_download_mode(bool enable)
>>   	if (avail) {
>>   		ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
>>   	} else if (__scm->dload_mode_addr) {
>> -		ret = qcom_scm_io_writel(__scm->dload_mode_addr,
>> -				enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
>> +		val = (enable ? QCOM_DOWNLOAD_FULLDUMP : QCOM_DOWNLOAD_NODUMP);
> unnecessary braces
> 
> Konrad
>> +		val <<= QCOM_DOWNLOAD_MODE_SHIFT;
>> +		ret = qcom_scm_io_update_field(__scm->dload_mode_addr,
>> +				QCOM_DOWNLOAD_MODE_MASK, val);
>>   	} else {
>>   		dev_err(__scm->dev,
>>   			"No available mechanism for setting download mode\n");



More information about the linux-arm-kernel mailing list