[PATCH v3 3/4] clk: sunxi-ng: Convert early providers to platform drivers

[Maxime Ripard]

On Wed, Jun 28, 2023 at 07:33:35PM +0100, Måns Rullgård wrote:
> Maxime Ripard <mripard at kernel.org> writes:
> 
> > On Wed, Jun 28, 2023 at 12:07:56PM +0100, Måns Rullgård wrote:
> >> Maxime Ripard <mripard at kernel.org> writes:
> >> 
> >> > On Mon, Jun 26, 2023 at 01:21:33PM +0100, Måns Rullgård wrote:
> >> >> Samuel Holland <samuel at sholland.org> writes:
> >> >> 
> >> >> > The PRCM CCU drivers depend on clocks provided by other CCU drivers. For
> >> >> > example, the sun8i-r-ccu driver uses the "pll-periph" clock provided by
> >> >> > the SoC's main CCU.
> >> >> >
> >> >> > However, sun8i-r-ccu is an early OF clock provider, and many of the
> >> >> > main CCUs (e.g. sun50i-a64-ccu) use platform drivers. This means that
> >> >> > the consumer clocks will be orphaned until the supplier driver is bound.
> >> >> > This can be avoided by converting the remaining CCUs to use platform
> >> >> > drivers. Then fw_devlink will ensure the drivers are bound in the
> >> >> > optimal order.
> >> >> >
> >> >> > The sun5i CCU is the only one which actually needs to be an early clock
> >> >> > provider, because it provides the clock for the system timer. That one
> >> >> > is left alone.
> >> >> >
> >> >> > Signed-off-by: Samuel Holland <samuel at sholland.org>
> >> >> > ---
> >> >> >
> >> >> > (no changes since v1)
> >> >> >
> >> >> >  drivers/clk/sunxi-ng/Kconfig             | 20 ++++----
> >> >> >  drivers/clk/sunxi-ng/ccu-sun4i-a10.c     | 58 +++++++++++++--------
> >> >> >  drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c   | 56 ++++++++++++--------
> >> >> >  drivers/clk/sunxi-ng/ccu-sun50i-h616.c   | 33 ++++++++----
> >> >> >  drivers/clk/sunxi-ng/ccu-sun6i-a31.c     | 40 +++++++++++----
> >> >> >  drivers/clk/sunxi-ng/ccu-sun8i-a23.c     | 35 +++++++++----
> >> >> >  drivers/clk/sunxi-ng/ccu-sun8i-a33.c     | 40 +++++++++++----
> >> >> >  drivers/clk/sunxi-ng/ccu-sun8i-h3.c      | 62 ++++++++++++++--------
> >> >> >  drivers/clk/sunxi-ng/ccu-sun8i-r.c       | 65 ++++++++++++++----------
> >> >> >  drivers/clk/sunxi-ng/ccu-sun8i-v3s.c     | 57 +++++++++++++--------
> >> >> >  drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c | 38 ++++++++++----
> >> >> >  11 files changed, 332 insertions(+), 172 deletions(-)
> >> >> 
> >> >> This broke the hstimer clocksource on A20 since it requires a clock
> >> >> provided by the sun4i ccu driver.
> >> >
> >> > The A10 is probably broken by this, but the A20 should be able to use
> >> > the arch timers just like all the other Cortex-A7-based SoCs.
> >> >
> >> > Do you have a dmesg log that could help debug why it's not working?
> >> 
> >> The A20 works as such since, as you say, it has other clocksources.
> >> However, the hstimer has become unusable.  If anyone was using, for
> >> whatever reason, it won't be working for them now.
> >> 
> >> Before this change, the kernel log used include this line:
> >> 
> >> clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns
> >> 
> >> Now there is only a cryptic "Can't get timer clock" in its place.
> >> 
> >> As it is now, the hstimer driver is nothing but a waste of space.
> >> I figure it ought to be fixed one way or another.
> >
> > Yeah, definitely.
> >
> > IIRC, the situation is:
> >
> >  - A10 has just the "regular", old, timer
> >  - A10s/A13/GR8 has the A10 timer + hstimer
> >  - A20 has the A13 timers + arch timers
> >
> > We also default to the hstimer only for the A10s/A13 which aren't
> > affected by this patch series afaics.
> >
> > We also enable the HS timer for the A31, but just like the A20 it
> > doesn't use it by default, so it's probably been broken there too.
> >
> > I guess one way to fix it would be to switch the HS timer driver to a
> > lower priority than the A10 timer, so we pick that up by default instead
> > for the A10s/A13, and then convert the HS timer driver to a proper
> > platform_device driver that will be able to get its clock.
> >
> > The downside is that the A13 will lose some precision over its default
> > timer, but I don't think it's a big deal.
> 
> The options I see are converting the hstimer to a platform device or
> reverting the change to the sun4i ccu driver.
> 
> I don't personally have much of an opinion on this since my systems
> aren't affected.  The only reason I looked at it was that I noticed
> a new error message in the kernel logs.

Thanks for the report then. I'm not really working on that anymore, so I
won't submit a fix for this either.

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230630/bdb9535b/attachment-0001.sig>