[PATCH v2 1/4] dt-bindings: media: add mediatek ISP3.0 sensor interface

[Rob Herring]

On Fri, 30 Jun 2023 12:01:50 +0200, Julien Stephan wrote:
> From: Louis Kuo <louis.kuo at mediatek.com>
> 
> This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in
> some Mediatek SoC, such as the mt8365
> 
> Signed-off-by: Louis Kuo <louis.kuo at mediatek.com>
> Signed-off-by: Phi-Bang Nguyen <pnguyen at baylibre.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Signed-off-by: Julien Stephan <jstephan at baylibre.com>
> ---
>  .../media/mediatek,mt8365-seninf.yaml         | 295 ++++++++++++++++++
>  MAINTAINERS                                   |   7 +
>  2 files changed, 302 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.example.dts:28:18: fatal error: dt-bindings/power/mediatek,mt8365-power.h: No such file or directory
   28 |         #include <dt-bindings/power/mediatek,mt8365-power.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1512: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230630100321.1951138-2-jstephan@baylibre.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.