[PATCH v8 3/5] staging: bcm2835-camera: Register bcm2835-camera with vchiq_bus_type
Umang Jain
umang.jain at ideasonboard.com
Thu Jun 29 04:49:17 PDT 2023
Hi Kieran,
On 6/29/23 12:44 AM, Kieran Bingham wrote:
> Quoting Umang Jain (2023-06-27 21:16:26)
>> Register the bcm2835-camera with the vchiq_bus_type instead of using
>> platform driver/device.
>>
>> Also the VCHIQ firmware doesn't support device enumeration, hence
>> one has to maintain a list of devices to be registered in the interface.
>>
>> Signed-off-by: Umang Jain <umang.jain at ideasonboard.com>
>> ---
>> .../bcm2835-camera/bcm2835-camera.c | 16 +++++++-------
>> .../interface/vchiq_arm/vchiq_arm.c | 21 ++++++++++++++++---
>> 2 files changed, 26 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
>> index 346d00df815a..f37b2a881d92 100644
>> --- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
>> +++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
>> @@ -24,8 +24,9 @@
>> #include <media/v4l2-event.h>
>> #include <media/v4l2-common.h>
>> #include <linux/delay.h>
>> -#include <linux/platform_device.h>
>>
>> +#include "../interface/vchiq_arm/vchiq_arm.h"
>> +#include "../interface/vchiq_arm/vchiq_device.h"
>> #include "../vchiq-mmal/mmal-common.h"
>> #include "../vchiq-mmal/mmal-encodings.h"
>> #include "../vchiq-mmal/mmal-vchiq.h"
>> @@ -1841,7 +1842,7 @@ static struct v4l2_format default_v4l2_format = {
>> .fmt.pix.sizeimage = 1024 * 768,
>> };
>>
>> -static int bcm2835_mmal_probe(struct platform_device *pdev)
>> +static int bcm2835_mmal_probe(struct vchiq_device *device)
>> {
>> int ret;
>> struct bcm2835_mmal_dev *dev;
>> @@ -1896,7 +1897,7 @@ static int bcm2835_mmal_probe(struct platform_device *pdev)
>> &camera_instance);
>> ret = v4l2_device_register(NULL, &dev->v4l2_dev);
>> if (ret) {
>> - dev_err(&pdev->dev, "%s: could not register V4L2 device: %d\n",
>> + dev_err(&device->dev, "%s: could not register V4L2 device: %d\n",
>> __func__, ret);
>> goto free_dev;
>> }
>> @@ -1976,7 +1977,7 @@ static int bcm2835_mmal_probe(struct platform_device *pdev)
>> return ret;
>> }
>>
>> -static void bcm2835_mmal_remove(struct platform_device *pdev)
>> +static void bcm2835_mmal_remove(struct vchiq_device *device)
>> {
>> int camera;
>> struct vchiq_mmal_instance *instance = gdev[0]->instance;
>> @@ -1988,17 +1989,16 @@ static void bcm2835_mmal_remove(struct platform_device *pdev)
>> vchiq_mmal_finalise(instance);
>> }
>>
>> -static struct platform_driver bcm2835_camera_driver = {
>> +static struct vchiq_driver bcm2835_camera_driver = {
>> .probe = bcm2835_mmal_probe,
>> - .remove_new = bcm2835_mmal_remove,
>> + .remove = bcm2835_mmal_remove,
>> .driver = {
>> .name = "bcm2835-camera",
>> },
>> };
>>
>> -module_platform_driver(bcm2835_camera_driver)
>> +module_vchiq_driver(bcm2835_camera_driver)
>>
>> MODULE_DESCRIPTION("Broadcom 2835 MMAL video capture");
>> MODULE_AUTHOR("Vincent Sanders");
>> MODULE_LICENSE("GPL");
>> -MODULE_ALIAS("platform:bcm2835-camera");
> This bit worries me. I think that's how module autoloading is handled.
>
> Can you check into the details of MODULE_ALIAS and follow the rabbit
> hole for a bit? It's a few years since I last went down there so I can't
> remember the specifics right now.
vchiq_probe() will register both the bcm2385_audio and bcm2835-camera
hence, we don't need MODULE_ALIAS for those two.
So what I also tested is that, when bcm2835_vchiq loads, it will
auto-load both audio and camera with it (since these are child devices
of vchiq). I think that's the correct way.
>
> Except for that, I think this looks good.
>
>
>> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
>> index e8d40f891449..79d4d0eeb5fb 100644
>> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
>> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
>> @@ -67,7 +67,6 @@ int vchiq_susp_log_level = VCHIQ_LOG_ERROR;
>> DEFINE_SPINLOCK(msg_queue_spinlock);
>> struct vchiq_state g_state;
>>
>> -static struct platform_device *bcm2835_camera;
>> static struct platform_device *bcm2835_audio;
>>
>> struct vchiq_drvdata {
>> @@ -134,6 +133,15 @@ struct vchiq_pagelist_info {
>> unsigned int scatterlist_mapped;
>> };
>>
>> +/*
>> + * The devices implemented in the VCHIQ firmware are not discoverable,
>> + * so we need to maintain a list of them in order to register them with
>> + * the interface.
>> + */
>> +static const char *const vchiq_devices[] = {
>> + "bcm2835-camera",
>> +};
>> +
>> static void __iomem *g_regs;
>> /* This value is the size of the L2 cache lines as understood by the
>> * VPU firmware, which determines the required alignment of the
>> @@ -1798,6 +1806,7 @@ static int vchiq_probe(struct platform_device *pdev)
>> struct device_node *fw_node;
>> const struct of_device_id *of_id;
>> struct vchiq_drvdata *drvdata;
>> + unsigned int i;
>> int err;
>>
>> of_id = of_match_node(vchiq_of_match, pdev->dev.of_node);
>> @@ -1840,9 +1849,15 @@ static int vchiq_probe(struct platform_device *pdev)
>> goto error_exit;
>> }
>>
>> - bcm2835_camera = vchiq_register_child(pdev, "bcm2835-camera");
>> bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio");
>>
>> + for (i = 0; i < ARRAY_SIZE(vchiq_devices); i++) {
>> + err = vchiq_device_register(&pdev->dev, vchiq_devices[i]);
>> + if (err)
>> + dev_err(&pdev->dev, "Failed to register %s vchiq device\n",
>> + vchiq_devices[i]);
>> + }
>> +
>> return 0;
>>
>> failed_platform_init:
>> @@ -1854,7 +1869,7 @@ static int vchiq_probe(struct platform_device *pdev)
>> static void vchiq_remove(struct platform_device *pdev)
>> {
>> platform_device_unregister(bcm2835_audio);
>> - platform_device_unregister(bcm2835_camera);
>> + bus_for_each_dev(&vchiq_bus_type, NULL, NULL, vchiq_device_unregister);
>> vchiq_debugfs_deinit();
>> vchiq_deregister_chrdev();
>> }
>> --
>> 2.39.1
>>
More information about the linux-arm-kernel
mailing list