[PATCH v5 0/3] Add display support on the stm32f746-disco board

[Dario Binacchi]

The series adds support for the display on the stm32f746-disco board.

Changes in v5:
I am confident that framebuffer sizing is a real requirement for STM32 boards,
but I need some time to understand if and how to introduce this functionality.
Therefore, I drop the following patches to allow the series to be fully merged:
 - [4/6] dt-bindings: display: stm32-ltdc: add optional st,fb-bpp property
 - [5/6] ARM: dts: stm32: set framebuffer bit depth on stm32f746-disco
 - [6/6] drm/stm: set framebuffer bit depth through DTS property

Changes in v4:
- Use DTS property instead of module parameter to set the framebuffer bit depth.

Changes in v3:
- rename ltdc-pins-a-0 to ltdc-0.
- drop [4/6] dt-bindings: display: simple: add Rocktech RK043FN48H
  Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next):
  https://cgit.freedesktop.org/drm/drm-misc/commit/?id=c42a37a27c777d63961dd634a30f7c887949491a
- drop [5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel
  Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
  https://cgit.freedesktop.org/drm/drm-misc/commit/?id=13cdd12a9f934158f4ec817cf048fcb4384aa9dc

Dario Binacchi (3):
  ARM: dts: stm32: add ltdc support on stm32f746 MCU
  ARM: dts: stm32: add pin map for LTDC on stm32f7
  ARM: dts: stm32: support display on stm32f746-disco board

 arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++
 arch/arm/boot/dts/stm32f746-disco.dts  | 51 ++++++++++++++++++++++++++
 arch/arm/boot/dts/stm32f746.dtsi       | 10 +++++
 3 files changed, 96 insertions(+)

-- 
2.32.0