[PATCH v8 4/5] staging: bcm2835-audio: Register bcm2835-audio with vchiq_bus_type
Kieran Bingham
kieran.bingham at ideasonboard.com
Wed Jun 28 15:51:43 PDT 2023
Quoting Umang Jain (2023-06-27 21:16:27)
> Similar to how bcm2385-camera device is registered, register the
> bcm2835-audio with vchiq_bus_type as well.
bcm2835-audio here and in the dir name, but registered as
bcm2835_audio... Personally I prefer bcm2835-audio ... but this is
already discussed earlier in the series.
>
> Signed-off-by: Umang Jain <umang.jain at ideasonboard.com>
> ---
> .../vc04_services/bcm2835-audio/bcm2835.c | 17 ++++++++---------
> .../interface/vchiq_arm/vchiq_arm.c | 6 +-----
> 2 files changed, 9 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
> index 00bc898b0189..f81a9a4fbd5d 100644
> --- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
> +++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c
> @@ -1,12 +1,12 @@
> // SPDX-License-Identifier: GPL-2.0
> /* Copyright 2011 Broadcom Corporation. All rights reserved. */
>
> -#include <linux/platform_device.h>
> -
> #include <linux/init.h>
> #include <linux/slab.h>
> #include <linux/module.h>
>
> +#include "../interface/vchiq_arm/vchiq_arm.h"
> +#include "../interface/vchiq_arm/vchiq_device.h"
> #include "bcm2835.h"
>
> static bool enable_hdmi;
> @@ -268,9 +268,9 @@ static int snd_add_child_devices(struct device *device, u32 numchans)
> return 0;
> }
>
> -static int snd_bcm2835_alsa_probe(struct platform_device *pdev)
> +static int snd_bcm2835_alsa_probe(struct vchiq_device *device)
> {
> - struct device *dev = &pdev->dev;
> + struct device *dev = &device->dev;
> int err;
>
> if (num_channels <= 0 || num_channels > MAX_SUBSTREAMS) {
> @@ -292,20 +292,20 @@ static int snd_bcm2835_alsa_probe(struct platform_device *pdev)
>
> #ifdef CONFIG_PM
>
> -static int snd_bcm2835_alsa_suspend(struct platform_device *pdev,
> +static int snd_bcm2835_alsa_suspend(struct vchiq_device *device,
> pm_message_t state)
> {
> return 0;
> }
>
> -static int snd_bcm2835_alsa_resume(struct platform_device *pdev)
> +static int snd_bcm2835_alsa_resume(struct vchiq_device *device)
> {
> return 0;
> }
>
> #endif
>
> -static struct platform_driver bcm2835_alsa_driver = {
> +static struct vchiq_driver bcm2835_alsa_driver = {
> .probe = snd_bcm2835_alsa_probe,
> #ifdef CONFIG_PM
> .suspend = snd_bcm2835_alsa_suspend,
> @@ -315,9 +315,8 @@ static struct platform_driver bcm2835_alsa_driver = {
> .name = "bcm2835_audio",
> },
> };
> -module_platform_driver(bcm2835_alsa_driver);
> +module_vchiq_driver(bcm2835_alsa_driver);
>
> MODULE_AUTHOR("Dom Cobley");
> MODULE_DESCRIPTION("Alsa driver for BCM2835 chip");
> MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:bcm2835_audio");
And same as with the bcm2385-camera ... I expect this might be required
in some form to support module autoloading?
But with that resolved:
Reviewed-by: Kieran Bingham <kieran.bingham at ideasonboard.com>
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> index 79d4d0eeb5fb..75da37fa6372 100644
> --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
> @@ -67,8 +67,6 @@ int vchiq_susp_log_level = VCHIQ_LOG_ERROR;
> DEFINE_SPINLOCK(msg_queue_spinlock);
> struct vchiq_state g_state;
>
> -static struct platform_device *bcm2835_audio;
> -
> struct vchiq_drvdata {
> const unsigned int cache_line_size;
> struct rpi_firmware *fw;
> @@ -139,6 +137,7 @@ struct vchiq_pagelist_info {
> * the interface.
> */
> static const char *const vchiq_devices[] = {
> + "bcm2835_audio",
> "bcm2835-camera",
> };
>
> @@ -1849,8 +1848,6 @@ static int vchiq_probe(struct platform_device *pdev)
> goto error_exit;
> }
>
> - bcm2835_audio = vchiq_register_child(pdev, "bcm2835_audio");
> -
> for (i = 0; i < ARRAY_SIZE(vchiq_devices); i++) {
> err = vchiq_device_register(&pdev->dev, vchiq_devices[i]);
> if (err)
> @@ -1868,7 +1865,6 @@ static int vchiq_probe(struct platform_device *pdev)
>
> static void vchiq_remove(struct platform_device *pdev)
> {
> - platform_device_unregister(bcm2835_audio);
> bus_for_each_dev(&vchiq_bus_type, NULL, NULL, vchiq_device_unregister);
> vchiq_debugfs_deinit();
> vchiq_deregister_chrdev();
> --
> 2.39.1
>
More information about the linux-arm-kernel
mailing list