[PATCH v2 4/7] ASoC: mediatek: mt7986: add platform driver
Claudiu.Beznea at microchip.com
Claudiu.Beznea at microchip.com
Mon Jun 26 21:43:52 PDT 2023
On 26.06.2023 05:34, Maso Huang wrote:
> +static int mt7986_afe_pcm_dev_probe(struct platform_device *pdev)
> +{
> + struct mtk_base_afe *afe;
> + struct mt7986_afe_private *afe_priv;
> + struct device *dev;
> + int i, irq_id, ret;
> +
> + afe = devm_kzalloc(&pdev->dev, sizeof(*afe), GFP_KERNEL);
> + if (!afe)
> + return -ENOMEM;
> + platform_set_drvdata(pdev, afe);
> +
> + afe->platform_priv = devm_kzalloc(&pdev->dev, sizeof(*afe_priv),
> + GFP_KERNEL);
> + if (!afe->platform_priv)
> + return -ENOMEM;
> +
> + afe_priv = afe->platform_priv;
> + afe->dev = &pdev->dev;
> + dev = afe->dev;
> +
> + afe->base_addr = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(afe->base_addr))
> + return PTR_ERR(afe->base_addr);
> +
> + /* initial audio related clock */
> + ret = mt7986_init_clock(afe);
> + if (ret)
> + return dev_err_probe(dev, ret, "Cannot initialize clocks\n");
> +
> + ret = devm_pm_runtime_enable(dev);
> + if (ret)
> + return ret;
> +
> + /* enable clock for regcache get default value from hw */
> + afe_priv->pm_runtime_bypass_reg_ctl = true;
> + pm_runtime_get_sync(&pdev->dev);
> +
> + afe->regmap = devm_regmap_init_mmio(&pdev->dev, afe->base_addr,
> + &mt7986_afe_regmap_config);
> + if (IS_ERR(afe->regmap)) {
> + ret = PTR_ERR(afe->regmap);
> + goto err_pm_disable;
> + }
> +
> + pm_runtime_put_sync(&pdev->dev);
You already did here a put thus (see below)
> + afe_priv->pm_runtime_bypass_reg_ctl = false;
> +
> + /* init memif */
> + afe->memif_size = MT7986_MEMIF_NUM;
> + afe->memif = devm_kcalloc(dev, afe->memif_size, sizeof(*afe->memif),
> + GFP_KERNEL);
> + if (!afe->memif)
> + goto err_pm_disable;
> +
> + for (i = 0; i < afe->memif_size; i++) {
> + afe->memif[i].data = &memif_data[i];
> + afe->memif[i].irq_usage = -1;
> + }
> +
> + mutex_init(&afe->irq_alloc_lock);
> +
> + /* irq initialize */
> + afe->irqs_size = MT7986_IRQ_NUM;
> + afe->irqs = devm_kcalloc(dev, afe->irqs_size, sizeof(*afe->irqs),
> + GFP_KERNEL);
> + if (!afe->irqs)
> + goto err_pm_disable;
> +
> + for (i = 0; i < afe->irqs_size; i++)
> + afe->irqs[i].irq_data = &irq_data[i];
> +
> + /* request irq */
> + irq_id = platform_get_irq(pdev, 0);
> + if (irq_id < 0) {
> + dev_err(dev, "%pOFn no irq found\n", dev->of_node);
> + ret = irq_id;
> + goto err_pm_disable;
> + }
> + ret = devm_request_irq(dev, irq_id, mt7986_afe_irq_handler,
> + IRQF_TRIGGER_NONE, "asys-isr", (void *)afe);
> + if (ret) {
> + dev_err(dev, "could not request_irq for asys-isr\n");
> + goto err_pm_disable;
> + }
> +
> + /* init sub_dais */
> + INIT_LIST_HEAD(&afe->sub_dais);
> +
> + for (i = 0; i < ARRAY_SIZE(dai_register_cbs); i++) {
> + ret = dai_register_cbs[i](afe);
> + if (ret) {
> + dev_err(afe->dev, "dai register i %d fail, ret %d\n",
> + i, ret);
> + goto err_pm_disable;
> + }
> + }
> +
> + /* init dai_driver and component_driver */
> + ret = mtk_afe_combine_sub_dai(afe);
> + if (ret) {
> + dev_err(afe->dev, "mtk_afe_combine_sub_dai fail, ret %d\n",
> + ret);
> + goto err_pm_disable;
> + }
> +
> + afe->mtk_afe_hardware = &mt7986_afe_hardware;
> + afe->memif_fs = mt7986_memif_fs;
> + afe->irq_fs = mt7986_irq_fs;
> +
> + afe->runtime_resume = mt7986_afe_runtime_resume;
> + afe->runtime_suspend = mt7986_afe_runtime_suspend;
> +
> + /* register component */
> + ret = devm_snd_soc_register_component(&pdev->dev,
> + &mt7986_afe_component,
> + NULL, 0);
> + if (ret) {
> + dev_warn(dev, "err_platform\n");
> + goto err_pm_disable;
> + }
> +
> + ret = devm_snd_soc_register_component(afe->dev,
> + &mt7986_afe_pcm_dai_component,
> + afe->dai_drivers,
> + afe->num_dai_drivers);
> + if (ret) {
> + dev_warn(dev, "err_dai_component\n");
> + goto err_pm_disable;
> + }
> +
> + return ret;
> +
> +err_pm_disable:
> + pm_runtime_put_sync(&pdev->dev);
these should be no need for this one here.
> + pm_runtime_disable(&pdev->dev);
This is also covered by devm_pm_runtime_enable().
> + return ret;
> +}
More information about the linux-arm-kernel
mailing list