[PATCH V3 2/3] arm64: dts: imx93: add "fsl,imx8ulp-lpuart" compatible for imx93

[Sherry Sun]

i.MX93 and i.MX8ULP lpuart add some new featurs based on i.MX7ULP, for
example, i.MX93 and i.MX8ULP can support EOP(end-of-packet) function
while i.MX7ULP doesn't support, so add "fsl,imx8ulp-lpuart" compatible
string for i.MX93 to support those new features.

Signed-off-by: Sherry Sun <sherry.sun at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 8643612ace8c..16da5ef578c5 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -252,7 +252,7 @@
 			};
 
 			lpuart1: serial at 44380000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x44380000 0x1000>;
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
@@ -261,7 +261,7 @@
 			};
 
 			lpuart2: serial at 44390000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x44390000 0x1000>;
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
@@ -486,7 +486,7 @@
 			};
 
 			lpuart3: serial at 42570000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42570000 0x1000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
@@ -495,7 +495,7 @@
 			};
 
 			lpuart4: serial at 42580000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42580000 0x1000>;
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
@@ -504,7 +504,7 @@
 			};
 
 			lpuart5: serial at 42590000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42590000 0x1000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
@@ -513,7 +513,7 @@
 			};
 
 			lpuart6: serial at 425a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x425a0000 0x1000>;
 				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
@@ -551,7 +551,7 @@
 			};
 
 			lpuart7: serial at 42690000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42690000 0x1000>;
 				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
@@ -560,7 +560,7 @@
 			};
 
 			lpuart8: serial at 426a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x426a0000 0x1000>;
 				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
-- 
2.17.1