[PATCH] ARM: dts: hisilicon: Fix "status" values

Rob Herring robh at kernel.org
Mon Jun 26 15:10:19 PDT 2023


The defined value for "status" is "disabled", not "disable".

Signed-off-by: Rob Herring <robh at kernel.org>
---
 arch/arm/boot/dts/hisilicon/hi3519.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/hisilicon/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
index c524c854d319..a42b71cdc5d7 100644
--- a/arch/arm/boot/dts/hisilicon/hi3519.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
@@ -54,7 +54,7 @@ uart0: serial at 12100000 {
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart1: serial at 12101000 {
@@ -63,7 +63,7 @@ uart1: serial at 12101000 {
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart2: serial at 12102000 {
@@ -72,7 +72,7 @@ uart2: serial at 12102000 {
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart3: serial at 12103000 {
@@ -81,7 +81,7 @@ uart3: serial at 12103000 {
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart4: serial at 12104000 {
@@ -90,7 +90,7 @@ uart4: serial at 12104000 {
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer0: timer at 12000000 {
@@ -100,7 +100,7 @@ dual_timer0: timer at 12000000 {
 			reg = <0x12000000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer1: timer at 12001000 {
@@ -110,7 +110,7 @@ dual_timer1: timer at 12001000 {
 			reg = <0x12001000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer2: timer at 12002000 {
@@ -120,7 +120,7 @@ dual_timer2: timer at 12002000 {
 			reg = <0x12002000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus0: spi at 12120000 {
@@ -132,7 +132,7 @@ spi_bus0: spi at 12120000 {
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus1: spi at 12121000 {
@@ -144,7 +144,7 @@ spi_bus1: spi at 12121000 {
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus2: spi at 12122000 {
@@ -156,7 +156,7 @@ spi_bus2: spi at 12122000 {
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		sysctrl: system-controller at 12020000 {
-- 
2.40.1




More information about the linux-arm-kernel mailing list