[PATCH v3 3/4] clk: sunxi-ng: Convert early providers to platform drivers

[Måns Rullgård]

Samuel Holland <samuel at sholland.org> writes:

> The PRCM CCU drivers depend on clocks provided by other CCU drivers. For
> example, the sun8i-r-ccu driver uses the "pll-periph" clock provided by
> the SoC's main CCU.
>
> However, sun8i-r-ccu is an early OF clock provider, and many of the
> main CCUs (e.g. sun50i-a64-ccu) use platform drivers. This means that
> the consumer clocks will be orphaned until the supplier driver is bound.
> This can be avoided by converting the remaining CCUs to use platform
> drivers. Then fw_devlink will ensure the drivers are bound in the
> optimal order.
>
> The sun5i CCU is the only one which actually needs to be an early clock
> provider, because it provides the clock for the system timer. That one
> is left alone.
>
> Signed-off-by: Samuel Holland <samuel at sholland.org>
> ---
>
> (no changes since v1)
>
>  drivers/clk/sunxi-ng/Kconfig             | 20 ++++----
>  drivers/clk/sunxi-ng/ccu-sun4i-a10.c     | 58 +++++++++++++--------
>  drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c   | 56 ++++++++++++--------
>  drivers/clk/sunxi-ng/ccu-sun50i-h616.c   | 33 ++++++++----
>  drivers/clk/sunxi-ng/ccu-sun6i-a31.c     | 40 +++++++++++----
>  drivers/clk/sunxi-ng/ccu-sun8i-a23.c     | 35 +++++++++----
>  drivers/clk/sunxi-ng/ccu-sun8i-a33.c     | 40 +++++++++++----
>  drivers/clk/sunxi-ng/ccu-sun8i-h3.c      | 62 ++++++++++++++--------
>  drivers/clk/sunxi-ng/ccu-sun8i-r.c       | 65 ++++++++++++++----------
>  drivers/clk/sunxi-ng/ccu-sun8i-v3s.c     | 57 +++++++++++++--------
>  drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c | 38 ++++++++++----
>  11 files changed, 332 insertions(+), 172 deletions(-)

This broke the hstimer clocksource on A20 since it requires a clock
provided by the sun4i ccu driver.

-- 
Måns Rullgård