[PATCH v6 4/8] phy: Add HDMI configuration options
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sat Jun 24 11:02:06 PDT 2023
On 15/06/2023 04:38, Sandor Yu wrote:
> Allow HDMI PHYs to be configured through the generic
> functions through a custom structure added to the generic union.
>
> The parameters added here are based on HDMI PHY
> implementation practices. The current set of parameters
> should cover the potential users.
>
> Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
> ---
> include/linux/phy/phy-hdmi.h | 38 ++++++++++++++++++++++++++++++++++++
> include/linux/phy/phy.h | 7 ++++++-
> 2 files changed, 44 insertions(+), 1 deletion(-)
> create mode 100644 include/linux/phy/phy-hdmi.h
>
> diff --git a/include/linux/phy/phy-hdmi.h b/include/linux/phy/phy-hdmi.h
> new file mode 100644
> index 000000000000..5765aa5bc175
> --- /dev/null
> +++ b/include/linux/phy/phy-hdmi.h
> @@ -0,0 +1,38 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2022 NXP
> + */
> +
> +#ifndef __PHY_HDMI_H_
> +#define __PHY_HDMI_H_
> +
> +/**
> + * Pixel Encoding as HDMI Specification
> + * RGB, YUV422, YUV444:HDMI Specification 1.4a Section 6.5
> + * YUV420: HDMI Specification 2.a Section 7.1
> + */
> +enum hdmi_phy_colorspace {
> + HDMI_PHY_COLORSPACE_RGB, /* RGB 4:4:4 */
> + HDMI_PHY_COLORSPACE_YUV422, /* YCbCr 4:2:2 */
> + HDMI_PHY_COLORSPACE_YUV444, /* YCbCr 4:4:4 */
> + HDMI_PHY_COLORSPACE_YUV420, /* YCbCr 4:2:0 */
> + HDMI_PHY_COLORSPACE_RESERVED4,
> + HDMI_PHY_COLORSPACE_RESERVED5,
> + HDMI_PHY_COLORSPACE_RESERVED6,
> +};
This enum duplicates enum hdmi_colorspace from <linux/hdmi.h>
HDMI 2.0 defines '7' to be IDO-defined.
Would it be better to use that enum instead?
> +
> +/**
> + * struct phy_configure_opts_hdmi - HDMI configuration set
> + * @pixel_clk_rate: Pixel clock of video modes in KHz.
> + * @bpc: Maximum bits per color channel.
> + * @color_space: Colorspace in enum hdmi_phy_colorspace.
> + *
> + * This structure is used to represent the configuration state of a HDMI phy.
> + */
> +struct phy_configure_opts_hdmi {
> + unsigned int pixel_clk_rate;
> + unsigned int bpc;
> + enum hdmi_phy_colorspace color_space;
> +};
> +
> +#endif /* __PHY_HDMI_H_ */
[skipped the rest]
--
With best wishes
Dmitry
More information about the linux-arm-kernel
mailing list