[PATCH net-next 3/6] net: phy: update in-band AN mode when changing interface by PHY driver

[Choong Yong Liang]

Hi Russell,

Thank you for pointing that out.
I will fix it and send out version 2.

On 22/6/2023 11:06 pm, Russell King (Oracle) wrote:
> On Thu, Jun 22, 2023 at 04:43:51PM +0200, Simon Horman wrote:
>> On Thu, Jun 22, 2023 at 12:19:02PM +0800, Choong Yong Liang wrote:
>>> From: "Tan, Tee Min" <tee.min.tan at linux.intel.com>
>>>
>>> Add cur_link_an_mode into phy_device struct for PHY drivers to
>>> communicate the in-band AN mode setting with phylink framework.
>>>
>>> As there is a mechanism in PHY drivers to switch the PHY interface
>>> between SGMII and 2500BaseX according to link speed. In this case,
>>> the in-band AN mode should be switching based on the PHY interface
>>> as well, if the PHY interface has been changed/updated by PHY driver.
>>>
>>> For e.g., disable in-band AN in 2500BaseX mode, or enable in-band AN
>>> back for SGMII mode (10/100/1000Mbps).
>>>
>>> Signed-off-by: Tan, Tee Min <tee.min.tan at linux.intel.com>
>>> Signed-off-by: Choong Yong Liang <yong.liang.choong at linux.intel.com>
>>
>> ...
>>
>>> diff --git a/include/linux/phy.h b/include/linux/phy.h
>>> index 11c1e91563d4..c685b526e307 100644
>>> --- a/include/linux/phy.h
>>> +++ b/include/linux/phy.h
>>> @@ -756,6 +756,8 @@ struct phy_device {
>>>   	/* MACsec management functions */
>>>   	const struct macsec_ops *macsec_ops;
>>>   #endif
>>> +	/* For communicate the AN mode setting with phylink framework. */
>>> +	u8 cur_link_an_mode;
>>>   };
>>
>> Hi Choong Yong Liang,
>>
>> Please consider adding cur_link_an_mode to the kernel doc
>> for struct phy_device - which is above the definition of struct phy_device.
> 
> This looks like it's grabbing something from phylink and stuffing it
> into phylib.  However, I have no idea, because I don't seem to have
> received the original patches. I'm guessing the reason is:
> 
> 2023-06-22 05:21:24 1qCBoy-0003ji-G9 H=mga03.intel.com
> [134.134.136.65]:57703 I=[78.32.30.218]:25
> X=TLS1.2:ECDHE_SECP521R1__RSA_SHA512__AES_256_GCM:256
> F=<yong.liang.choong at linux.intel.com> rejected after DATA: unqualified
> address not permitted: failing address in "Cc:" header is: Tan
> 
> Which I suspect came from:
> 
> 	Tan, Tee Min <tee.min.tan at linux.intel.com>
> 
> and someone doesn't realise that a "," in the display-name part of
> an address *must* be quoted, otherwise "," is taken to be a separator
> in the address list.
> 
> Consequently, it has now become:
> 
> 	Tan at web.codeaurora.org, Tee Min <tee.min.tan at linux.intel.com>,
> 
> It should have been:
> 
> 	"Tan, Tee Min" <tee.min.tan at linux.intel.com>
> 
> with the double-quotes.
> 
> Please do not review this series further, but instead, please can the
> author repost it forthwith with correct conformant headers so that a
> proper review can be undertaken by all?
> 
> Thanks.
>