[PATCH] usb: ohci-at91: Fix the unhandle interrupt when resume

[Alan Stern]

On Thu, Jun 22, 2023 at 10:57:39AM +0800, Guiting Shen wrote:
> The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when
> suspend which will let the ohci_irq() skip the interrupt after resume. And
> nobody to handle this interrupt.
> 
> Set the ohci->rh_state to OHCI_RH_SUSPEND instead of OHCI_RH_HALTED when
> suspend to fix it.
> 
> Signed-off-by: Guiting Shen <aarongt.shen at gmail.com>
> ---
>  drivers/usb/host/ohci-at91.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
> index b9ce8d80f20b..7a970e573668 100644
> --- a/drivers/usb/host/ohci-at91.c
> +++ b/drivers/usb/host/ohci-at91.c
> @@ -645,7 +645,7 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
>  	 * REVISIT: some boards will be able to turn VBUS off...
>  	 */
>  	if (!ohci_at91->wakeup) {
> -		ohci->rh_state = OHCI_RH_HALTED;
> +		ohci->rh_state = OHCI_RH_SUSPENDED;

It looks like this change ignores the comment immediately above it 
(just before the start of this hunk).

If you want to find a way to handle IRQs better after the controller 
resumes, maybe you should change the resume routine instead of the 
suspend routine.

Alan Stern