[PATCH 7/7] arm64: dts: qcom: msm8916-samsung-fortuna: Add NFC
Lin, Meng-Bo
linmengbo0689 at protonmail.com
Wed Jun 21 17:05:33 PDT 2023
From: Joe Mason <buddyjojo06 at outlook.com>
The Samsung Galaxy Ace 4, Core Prime and some Grand Prime have a
Samsung S3FWRN5 NFC chip that works quite well with the s3fwrn5 driver
in the Linux NFC subsystem.
The clock setup for the NFC chip is a bit special (although this
seems to be a common approach used for Qualcomm devices with NFC):
The NFC chip has an output GPIO that is asserted whenever the clock
is needed to function properly. On the A3/A5 this is wired up to
PM8916 GPIO2, which is then configured with a special function
(NFC_CLK_REQ or BB_CLK2_REQ).
Enabling the rpmcc RPM_SMD_BB_CLK2_PIN clock will then instruct
PM8916 to automatically enable the clock whenever the NFC chip
requests it. The advantage is that the clock is only enabled when
needed and we don't need to manage it ourselves from the NFC driver.
Grand Prime SM-G530Y (fortunaltezt) has a NXP PN547, which is supported
by the nxp-nci-i2c driver in mainline.
It seems to detect NFC tags using "nfctool" just fine, although more
testing is difficult given there seem to be very few useful applications
making use of the Linux NFC subsystem.
Signed-off-by: Joe Mason <buddyjojo06 at outlook.com>
[Put i2c-nfc and NFC pinctrl into fortuna.dtsi to share it with other variants]
Signed-off-by: Stephan Gerhold <stephan at gerhold.net>
[Add pn547_nfc]
Signed-off-by: Lin, Meng-Bo <linmengbo0689 at protonmail.com>
---
.../dts/qcom/msm8216-samsung-fortuna3g.dts | 5 ++
.../qcom/msm8916-samsung-fortuna-common.dtsi | 81 +++++++++++++++++++
.../dts/qcom/msm8916-samsung-fortunaltezt.dts | 4 +
.../dts/qcom/msm8916-samsung-gprimeltecan.dts | 25 ++++++
.../qcom/msm8916-samsung-grandprimelte.dts | 4 +
.../qcom/msm8916-samsung-rossa-common.dtsi | 4 +
6 files changed, 123 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts
index e7f6df229f9a..694a9962ee22 100644
--- a/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts
+++ b/arch/arm64/boot/dts/qcom/msm8216-samsung-fortuna3g.dts
@@ -10,6 +10,11 @@ / {
chassis-type = "handset";
};
+&i2c_nfc {
+ /* 3G variant doesn't have NFC */
+ status = "disabled";
+};
+
&st_accel {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
index 0436b8ccc3e8..e58cce5d1879 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
aliases {
@@ -52,6 +53,53 @@ haptic {
max-microvolt = <3300000>;
};
+ i2c_nfc: i2c-nfc {
+ compatible = "i2c-gpio";
+ sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+ pinctrl-0 = <&nfc_i2c_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Available NFC chip varies depending on model variant */
+ pn547_nfc: nfc at 2b {
+ compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+ reg = <0x2b>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+ enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&nfc_default>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ s3fwrn5_nfc: nfc at 27 {
+ compatible = "samsung,s3fwrn5-i2c";
+ reg = <0x27>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+ en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+ clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
+
+ pinctrl-0 = <&nfc_default>, <&nfc_clk_req>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+ };
+
reg_motor_vdd: regulator-motor-vdd {
compatible = "regulator-fixed";
regulator-name = "motor_vdd";
@@ -286,6 +334,29 @@ muic_int_default: muic-int-default-state {
bias-disable;
};
+ nfc_default: nfc-default-state {
+ nfc-pins {
+ pins = "gpio20", "gpio49";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ irq-pins {
+ pins = "gpio21";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ nfc_i2c_default: nfc-i2c-default-state {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
sdc2_cd_default: sdc2-cd-default-state {
pins = "gpio38";
function = "gpio";
@@ -307,3 +378,13 @@ tsp_int_default: tsp-int-default-state {
bias-disable;
};
};
+
+&pm8916_gpios {
+ nfc_clk_req: nfc-clk-req-state {
+ pins = "gpio2";
+ function = "func1";
+ power-source = <PM8916_GPIO_L2>;
+ bias-disable;
+ input-enable;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortunaltezt.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortunaltezt.dts
index 0716ef577df1..eb033f555184 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortunaltezt.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortunaltezt.dts
@@ -22,6 +22,10 @@ / {
chassis-type = "handset";
};
+&pn547_nfc {
+ status = "okay";
+};
+
&st_accel {
compatible = "st,lis2hh12";
mount-matrix = "1", "0", "0",
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts
index b0d8ac3d6ce9..1a24e00e2024 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gprimeltecan.dts
@@ -21,6 +21,26 @@ tz-apps at 85500000 {
};
};
+&blsp_i2c6 {
+ status = "okay";
+
+ nfc at 27 {
+ compatible = "samsung,s3fwrn5-i2c";
+ reg = <0x27>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+ en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+ clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
+
+ pinctrl-0 = <&nfc_default>, <&nfc_clk_req>;
+ pinctrl-names = "default";
+ };
+};
+
&bosch_accel {
status = "okay";
};
@@ -28,3 +48,8 @@ &bosch_accel {
&bosch_magn {
status = "okay";
};
+
+&i2c_nfc {
+ /* Used for MFD instead. NFC is on i2c6 */
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts
index f7fc538fda04..090b8fb6b444 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandprimelte.dts
@@ -17,3 +17,7 @@ &bosch_accel {
&bosch_magn {
status = "okay";
};
+
+&s3fwrn5_nfc {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi
index 39f99b5030e5..dbc4ee8719a6 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi
@@ -23,6 +23,10 @@ &blsp_i2c5 {
/delete-node/ touchscreen at 20;
};
+&s3fwrn5_nfc {
+ status = "okay";
+};
+
&st_accel {
compatible = "st,lis2hh12";
mount-matrix = "1", "0", "0",
--
2.39.2
More information about the linux-arm-kernel
mailing list