[PATCH v4 12/14] drm/mediatek: Improve compatibility of display driver
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Wed Jun 21 01:15:19 PDT 2023
Il 21/06/23 05:19, Hsiao Chien Sung ha scritto:
> - Add new functions to enable/disable components, and
> reuse them when clock enable/disable
> - Check if the component is defined before using it since
> some modules are MT8188 only (ex. PADDING)
> - Control components according to its type rather than ID
> - Use a for-loop to add/remove components in an arrays,
> so we can only maintain this array to make sure every
> component will be initialized properly
>
> Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
> ---
> .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c | 186 +++++++++---------
> 1 file changed, 96 insertions(+), 90 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> index c0a38f5217ee..69ae531294ff 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> @@ -51,6 +51,7 @@ enum mtk_ovl_adaptor_comp_id {
>
> struct ovl_adaptor_comp_match {
> enum mtk_ovl_adaptor_comp_type type;
> + enum mtk_ddp_comp_id comp_id;
> int alias_id;
> };
>
> @@ -67,21 +68,78 @@ static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
> };
>
> static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
> - [OVL_ADAPTOR_MDP_RDMA0] = { OVL_ADAPTOR_TYPE_RDMA, 0 },
> - [OVL_ADAPTOR_MDP_RDMA1] = { OVL_ADAPTOR_TYPE_RDMA, 1 },
> - [OVL_ADAPTOR_MDP_RDMA2] = { OVL_ADAPTOR_TYPE_RDMA, 2 },
> - [OVL_ADAPTOR_MDP_RDMA3] = { OVL_ADAPTOR_TYPE_RDMA, 3 },
> - [OVL_ADAPTOR_MDP_RDMA4] = { OVL_ADAPTOR_TYPE_RDMA, 4 },
> - [OVL_ADAPTOR_MDP_RDMA5] = { OVL_ADAPTOR_TYPE_RDMA, 5 },
> - [OVL_ADAPTOR_MDP_RDMA6] = { OVL_ADAPTOR_TYPE_RDMA, 6 },
> - [OVL_ADAPTOR_MDP_RDMA7] = { OVL_ADAPTOR_TYPE_RDMA, 7 },
> - [OVL_ADAPTOR_MERGE0] = { OVL_ADAPTOR_TYPE_MERGE, 1 },
> - [OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE, 2 },
> - [OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE, 3 },
> - [OVL_ADAPTOR_MERGE3] = { OVL_ADAPTOR_TYPE_MERGE, 4 },
> - [OVL_ADAPTOR_ETHDR0] = { OVL_ADAPTOR_TYPE_ETHDR, 0 },
> + [OVL_ADAPTOR_ETHDR0] = { OVL_ADAPTOR_TYPE_ETHDR, DDP_COMPONENT_ETHDR_MIXER, 0 },
> + [OVL_ADAPTOR_MDP_RDMA0] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA0, 0 },
> + [OVL_ADAPTOR_MDP_RDMA1] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA1, 1 },
> + [OVL_ADAPTOR_MDP_RDMA2] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA2, 2 },
> + [OVL_ADAPTOR_MDP_RDMA3] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA3, 3 },
> + [OVL_ADAPTOR_MDP_RDMA4] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA4, 4 },
> + [OVL_ADAPTOR_MDP_RDMA5] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA5, 5 },
> + [OVL_ADAPTOR_MDP_RDMA6] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA6, 6 },
> + [OVL_ADAPTOR_MDP_RDMA7] = { OVL_ADAPTOR_TYPE_RDMA, DDP_COMPONENT_MDP_RDMA7, 7 },
> + [OVL_ADAPTOR_MERGE0] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE1, 1 },
> + [OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE2, 2 },
> + [OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE3, 3 },
> + [OVL_ADAPTOR_MERGE3] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE4, 4 },
> };
>
> +static int mtk_ovl_adaptor_enable(struct device *dev, enum mtk_ovl_adaptor_comp_type type)
> +{
> + int ret = 0;
int ret;
> +
> + if (!dev)
if (!dev)
return -ENODEV;
> + goto end;
> +
> + switch (type) {
> + case OVL_ADAPTOR_TYPE_ETHDR:
> + ret = mtk_ethdr_clk_enable(dev);
> + break;
> + case OVL_ADAPTOR_TYPE_MERGE:
> + ret = mtk_merge_clk_enable(dev);
We already have a .clk_enable() callback in struct mtk_ddp_comp_funcs: to
greatly enhance your nice cleanup, you could use that instead, which basically
eliminates the need of having any if branch and/or switch.
> + break;
> + case OVL_ADAPTOR_TYPE_RDMA:
> + // only LARB users need to do this
Please, C-style comments only.
> + ret = pm_runtime_get_sync(dev);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enable power domain, error(%d)\n", ret);
> + goto end;
> + }
> + ret = mtk_mdp_rdma_clk_enable(dev);
> + if (ret)
> + pm_runtime_put(dev);
> + break;
> + default:
> + dev_err(dev, "Unknown type: %d\n", type);
Are we supposed to return 0 for unknown type?!
> + }
> +
> + if (ret)
> + dev_err(dev, "Failed to enable clock: error(%d)\n", ret);
if (ret) {
dev_err(...)
return ret;
}
return 0;
> +
> +end:
> + return ret;
> +}
> +
> +static void mtk_ovl_adaptor_disable(struct device *dev, enum mtk_ovl_adaptor_comp_type type)
> +{
> + if (!dev)
> + return;
> +
> + switch (type) {
> + case OVL_ADAPTOR_TYPE_ETHDR:
> + mtk_ethdr_clk_disable(dev);
> + break;
> + case OVL_ADAPTOR_TYPE_MERGE:
> + mtk_merge_clk_disable(dev);
> + break;
> + case OVL_ADAPTOR_TYPE_RDMA:
> + mtk_mdp_rdma_clk_disable(dev);
> + pm_runtime_put(dev);
> + break;
> + default:
> + dev_err(dev, "Unknown type: %d\n", type);
> + }
> +}
> +
> void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
> struct mtk_plane_state *state,
> struct cmdq_pkt *cmdq_pkt)
> @@ -186,72 +244,30 @@ void mtk_ovl_adaptor_stop(struct device *dev)
> int mtk_ovl_adaptor_clk_enable(struct device *dev)
> {
> struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
> - struct device *comp;
> - int ret;
> + int ret = 0;
Keep `int ret;`
> int i;
>
> - for (i = 0; i < OVL_ADAPTOR_MERGE0; i++) {
> - comp = ovl_adaptor->ovl_adaptor_comp[i];
> - ret = pm_runtime_get_sync(comp);
> - if (ret < 0) {
> - dev_err(dev, "Failed to enable power domain %d, err %d\n", i, ret);
> - goto pwr_err;
> - }
> - }
> -
> for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
> - comp = ovl_adaptor->ovl_adaptor_comp[i];
> -
> - if (i < OVL_ADAPTOR_MERGE0)
> - ret = mtk_mdp_rdma_clk_enable(comp);
> - else if (i < OVL_ADAPTOR_ETHDR0)
> - ret = mtk_merge_clk_enable(comp);
> - else
> - ret = mtk_ethdr_clk_enable(comp);
> + ret = mtk_ovl_adaptor_enable(ovl_adaptor->ovl_adaptor_comp[i],
> + comp_matches[i].type);
> if (ret) {
> - dev_err(dev, "Failed to enable clock %d, err %d\n", i, ret);
> - goto clk_err;
> + while (--i >= 0)
> + mtk_ovl_adaptor_disable(ovl_adaptor->ovl_adaptor_comp[i],
> + comp_matches[i].type);
> + break;
Instead of a break here, just return ret?
> }
> }
> -
> - return ret;
> -
> -clk_err:
> - while (--i >= 0) {
> - comp = ovl_adaptor->ovl_adaptor_comp[i];
> - if (i < OVL_ADAPTOR_MERGE0)
> - mtk_mdp_rdma_clk_disable(comp);
> - else if (i < OVL_ADAPTOR_ETHDR0)
> - mtk_merge_clk_disable(comp);
> - else
> - mtk_ethdr_clk_disable(comp);
> - }
> - i = OVL_ADAPTOR_MERGE0;
> -
> -pwr_err:
> - while (--i >= 0)
> - pm_runtime_put(ovl_adaptor->ovl_adaptor_comp[i]);
> -
> return ret;
...and return 0 here.
> }
>
Regards,
Angelo
More information about the linux-arm-kernel
mailing list