[PATCH v3 3/4] dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml

[Sebastian Reichel]

Hi,

On Fri, Jun 16, 2023 at 01:16:45PM +0300, Claudiu Beznea wrote:
> Convert Microchip AT91 SAMA5D2 shutdown controller to YAML. SAMA7G5 SHDWC
> DT node (available in arch/arm/boot/dts/sama7g5.dtsi) has syscon along with
> its compatible. There is no usage of this syscon in the current code but it
> may be necessary in future as some registers of SHDWC are accessed in
> different drivers (at91-sama5d2_shdwc.c and arch/arm/mach-at91/pm.c).
> Thus update the YAML with it to make DT checkers happy.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> Acked-by: Nicolas Ferre <nicolas.ferre at microchip.com>
> ---

Thanks, queued.

-- Sebastian

>  .../devicetree/bindings/arm/atmel-sysregs.txt |  63 ----------
>  .../power/reset/atmel,sama5d2-shdwc.yaml      | 114 ++++++++++++++++++
>  2 files changed, 114 insertions(+), 63 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index e6b2fb291b45..67a66bf74895 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -52,69 +52,6 @@ Example:
>  		reg = <0xe3804000 0x1000>;
>  };
>  
> -SHDWC SAMA5D2-Compatible Shutdown Controller
> -
> -1) shdwc node
> -
> -required properties:
> -- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
> -  "microchip,sama7g5-shdwc"
> -- reg: should contain registers location and length
> -- clocks: phandle to input clock.
> -- #address-cells: should be one. The cell is the wake-up input index.
> -- #size-cells: should be zero.
> -
> -optional properties:
> -
> -- debounce-delay-us: minimum wake-up inputs debouncer period in
> -  microseconds. It's usually a board-related property.
> -- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
> -
> -optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
> -- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
> -
> -The node contains child nodes for each wake-up input that the platform uses.
> -
> -2) input nodes
> -
> -Wake-up input nodes are usually described in the "board" part of the Device
> -Tree. Note also that input 0 is linked to the wake-up pin and is frequently
> -used.
> -
> -Required properties:
> -- reg: should contain the wake-up input index [0 - 15].
> -
> -Optional properties:
> -- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
> -  by the child, forces the wake-up of the core power supply on a high level.
> -  The default is to be active low.
> -
> -Example:
> -
> -On the SoC side:
> -	shdwc at f8048010 {
> -		compatible = "atmel,sama5d2-shdwc";
> -		reg = <0xf8048010 0x10>;
> -		clocks = <&clk32k>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		atmel,wakeup-rtc-timer;
> -	};
> -
> -On the board side:
> -	shdwc at f8048010 {
> -		debounce-delay-us = <976>;
> -
> -		input at 0 {
> -			reg = <0>;
> -		};
> -
> -		input at 1 {
> -			reg = <1>;
> -			atmel,wakeup-active-high;
> -		};
> -	};
> -
>  Special Function Registers (SFR)
>  
>  Special Function Registers (SFR) manage specific aspects of the integrated
> diff --git a/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
> new file mode 100644
> index 000000000000..8c58e12cdb60
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
> @@ -0,0 +1,114 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip AT91 SAMA5D2 SHDWC Shutdown Controller
> +
> +maintainers:
> +  - Claudiu Beznea <claudiu.beznea at microchip.com>
> +
> +description: |
> +  Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO
> +  and VDDCORE and the wake-up detection on debounced input lines.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: microchip,sama7g5-shdwc
> +          - const: syscon
> +      - enum:
> +          - atmel,sama5d2-shdwc
> +          - microchip,sam9x60-shdwc
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  debounce-delay-us:
> +    description:
> +      Minimum wake-up inputs debouncer period in microseconds. It is usually a
> +      board-related property.
> +
> +  atmel,wakeup-rtc-timer:
> +    description: enable real-time clock wake-up
> +    type: boolean
> +
> +  atmel,wakeup-rtt-timer:
> +    description: enable real-time timer wake-up
> +    type: boolean
> +
> +patternProperties:
> +  "^input@[0-15]$":
> +    description:
> +      Wake-up input nodes. These are usually described in the "board" part of
> +      the Device Tree. Note also that input 0 is linked to the wake-up pin and
> +      is frequently used.
> +    type: object
> +    properties:
> +      reg:
> +        description: contains the wake-up input index
> +        minimum: 0
> +        maximum: 15
> +
> +      atmel,wakeup-active-high:
> +        description:
> +          The corresponding wake-up input described by the child forces the
> +          wake-up of the core power supply on a high level. The default is to
> +          be active low.
> +        type: boolean
> +
> +    required:
> +      - reg
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: atmel,sama5d2-shdwc
> +    then:
> +      properties:
> +        atmel,wakeup-rtt-timer: false
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    shdwc: poweroff at f8048010 {
> +        compatible = "atmel,sama5d2-shdwc";
> +        reg = <0xf8048010 0x10>;
> +        clocks = <&clk32k>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        atmel,wakeup-rtc-timer;
> +        debounce-delay-us = <976>;
> +
> +        input at 0 {
> +            reg = <0>;
> +        };
> +
> +        input at 1 {
> +            reg = <1>;
> +            atmel,wakeup-active-high;
> +        };
> +    };
> +
> +...
> -- 
> 2.34.1
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230619/7e1fa3f9/attachment.sig>