[PATCH net v6 5/6] net: dsa: introduce preferred_default_local_cpu_port and use on MT7530

Florian Fainelli f.fainelli at gmail.com
Mon Jun 19 09:05:39 PDT 2023



On 6/17/2023 7:26 AM, arinc9.unal at gmail.com wrote:
> From: Vladimir Oltean <olteanv at gmail.com>
> 
> Since the introduction of the OF bindings, DSA has always had a policy that
> in case multiple CPU ports are present in the device tree, the numerically
> smallest one is always chosen.
> 
> The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU
> ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because
> it has higher bandwidth.
> 
> The MT7530 driver developers had 3 options:
> - to modify DSA when the MT7531 switch support was introduced, such as to
>    prefer the better port
> - to declare both CPU ports in device trees as CPU ports, and live with the
>    sub-optimal performance resulting from not preferring the better port
> - to declare just port 6 in the device tree as a CPU port
> 
> Of course they chose the path of least resistance (3rd option), kicking the
> can down the road. The hardware description in the device tree is supposed
> to be stable - developers are not supposed to adopt the strategy of
> piecemeal hardware description, where the device tree is updated in
> lockstep with the features that the kernel currently supports.
> 
> Now, as a result of the fact that they did that, any attempts to modify the
> device tree and describe both CPU ports as CPU ports would make DSA change
> its default selection from port 6 to 5, effectively resulting in a
> performance degradation visible to users with the MT7531BE switch as can be
> seen below.
> 
> Without preferring port 6:
> 
> [ ID][Role] Interval           Transfer     Bitrate         Retr
> [  5][TX-C]   0.00-20.00  sec   374 MBytes   157 Mbits/sec  734    sender
> [  5][TX-C]   0.00-20.00  sec   373 MBytes   156 Mbits/sec    receiver
> [  7][RX-C]   0.00-20.00  sec  1.81 GBytes   778 Mbits/sec    0    sender
> [  7][RX-C]   0.00-20.00  sec  1.81 GBytes   777 Mbits/sec    receiver
> 
> With preferring port 6:
> 
> [ ID][Role] Interval           Transfer     Bitrate         Retr
> [  5][TX-C]   0.00-20.00  sec  1.99 GBytes   856 Mbits/sec  273    sender
> [  5][TX-C]   0.00-20.00  sec  1.99 GBytes   855 Mbits/sec    receiver
> [  7][RX-C]   0.00-20.00  sec  1.72 GBytes   737 Mbits/sec   15    sender
> [  7][RX-C]   0.00-20.00  sec  1.71 GBytes   736 Mbits/sec    receiver
> 
> Using one port for WAN and the other ports for LAN is a very popular use
> case which is what this test emulates.
> 
> As such, this change proposes that we retroactively modify stable kernels
> (which don't support the modification of the CPU port assignments, so as to
> let user space fix the problem and restore the throughput) to keep the
> mt7530 driver preferring port 6 even with device trees where the hardware
> is more fully described.
> 
> Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
> Signed-off-by: Vladimir Oltean <olteanv at gmail.com>
> Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>

Reviewed-by: Florian Fainelli <florian.fainelli at broadcom.com>
-- 
Florian



More information about the linux-arm-kernel mailing list