[PATCH v6 0/2] dt-bindings: mtd: marvell-nand: Add YAML scheme

[Chris Packham]

On 16/06/23 23:58, Gregory CLEMENT wrote:
> Gregory CLEMENT <gregory.clement at bootlin.com> writes:
>
>> Chris Packham <chris.packham at alliedtelesis.co.nz> writes:
>>
>>> Add YAML scheme for the Marvell's NAND controller
>>> to validate it's DT bindings. Old txt file is deleted,
>>> not included the compatibles and properties which were marked as
>>> deprecated.
>>>
>>> Also fix node name in cp11x DTSI acording to nand-controller.yaml
>>>
>>> I've picked up this series to hopefully get it over the line. I think I've
>>> addressed all the feedback from the last round of review.
>>>
>>> Vadym Kochan (2):
>>>    dt-bindings: mtd: marvell-nand: Convert to YAML DT scheme
>>>    arm64: dts: marvell: cp11x: Fix nand_controller node name according to
>>>      YAML
>>
>> Both patch applied on mvebu/dt64
>>
>> However if the first patch should be merged through another tree, let me
>> know.
> Finally I removed these both patches, I missed the version 9!
>
> I applied the 2 patches for the dts files from v9.
>
> Thanks,
>
> Gregory
Thanks and sorry for the confusion. There's a v10 on the way but I can 
drop out the dts changes from that now.
>>
>>>   .../bindings/mtd/marvell,nand-controller.yaml | 190 ++++++++++++++++++
>>>   .../devicetree/bindings/mtd/marvell-nand.txt  | 126 ------------
>>>   MAINTAINERS                                   |   1 -
>>>   arch/arm64/boot/dts/marvell/armada-cp11x.dtsi |   2 +-
>>>   4 files changed, 191 insertions(+), 128 deletions(-)
>>>   create mode 100644 Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
>>>   delete mode 100644 Documentation/devicetree/bindings/mtd/marvell-nand.txt
>>>
>>> -- 
>>> 2.40.1
>>>
>> -- 
>> Gregory Clement, Bootlin
>> Embedded Linux and Kernel engineering
>> http://scanmail.trustwave.com/?c=20988&d=0c6M5H8PBagWXDuSKsjbXpd1zLX-HHHRk3xSZOdFDw&u=http%3a%2f%2fbootlin%2ecom