[PATCH net-next 09/15] net: mvpp2: update PCS driver to use neg_mode
Russell King (Oracle)
rmk+kernel at armlinux.org.uk
Fri Jun 16 05:07:03 PDT 2023
Update mvpp2's embedded PCS drivers to use neg_mode rather than the
mode argument, remembering to update the ACPI path as well. As there
are no pcs_link_up() methods, this only affects the two pcs_config()
methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index adc953611913..1fec84b4c068 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6168,8 +6168,7 @@ static void mvpp2_xlg_pcs_get_state(struct phylink_pcs *pcs,
state->pause |= MLO_PAUSE_RX;
}
-static int mvpp2_xlg_pcs_config(struct phylink_pcs *pcs,
- unsigned int mode,
+static int mvpp2_xlg_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
phy_interface_t interface,
const unsigned long *advertising,
bool permit_pause_to_mac)
@@ -6232,7 +6231,7 @@ static void mvpp2_gmac_pcs_get_state(struct phylink_pcs *pcs,
state->pause |= MLO_PAUSE_TX;
}
-static int mvpp2_gmac_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+static int mvpp2_gmac_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
phy_interface_t interface,
const unsigned long *advertising,
bool permit_pause_to_mac)
@@ -6246,7 +6245,7 @@ static int mvpp2_gmac_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
MVPP2_GMAC_FLOW_CTRL_AUTONEG |
MVPP2_GMAC_AN_DUPLEX_EN;
- if (phylink_autoneg_inband(mode)) {
+ if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
mask |= MVPP2_GMAC_CONFIG_MII_SPEED |
MVPP2_GMAC_CONFIG_GMII_SPEED |
MVPP2_GMAC_CONFIG_FULL_DUPLEX;
@@ -6649,8 +6648,9 @@ static void mvpp2_acpi_start(struct mvpp2_port *port)
mvpp2_mac_prepare(&port->phylink_config, MLO_AN_INBAND,
port->phy_interface);
mvpp2_mac_config(&port->phylink_config, MLO_AN_INBAND, &state);
- pcs->ops->pcs_config(pcs, MLO_AN_INBAND, port->phy_interface,
- state.advertising, false);
+ pcs->ops->pcs_config(pcs, PHYLINK_PCS_NEG_INBAND_ENABLED,
+ port->phy_interface, state.advertising,
+ false);
mvpp2_mac_finish(&port->phylink_config, MLO_AN_INBAND,
port->phy_interface);
mvpp2_mac_link_up(&port->phylink_config, NULL,
@@ -6896,7 +6896,9 @@ static int mvpp2_port_probe(struct platform_device *pdev,
dev->dev.of_node = port_node;
port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
+ port->pcs_gmac.neg_mode = true;
port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
+ port->pcs_xlg.neg_mode = true;
if (!mvpp2_use_acpi_compat_mode(port_fwnode)) {
port->phylink_config.dev = &dev->dev;
--
2.30.2
More information about the linux-arm-kernel
mailing list