[PATCH] ARM: dts: BCM5301X: Add cells sizes to PCIe nodes

[Rafał Miłecki]

From: Rafał Miłecki <rafal at milecki.pl>

This fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie at 12000: '#address-cells' is a required property
        From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie at 12000: '#size-cells' is a required property
        From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie at 13000: '#address-cells' is a required property
        From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie at 13000: '#size-cells' is a required property
        From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie at 14000: '#address-cells' is a required property
        From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie at 14000: '#size-cells' is a required property
        From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml

Two properties that need to be added later are "device_type" and
"ranges". Adding "device_type" on its own causes a new warning and the
value of "ranges" needs to be determined yet.

Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 arch/arm/boot/dts/bcm-ns.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-ns.dtsi b/arch/arm/boot/dts/bcm-ns.dtsi
index 53472d376a2c..dae9c47ace76 100644
--- a/arch/arm/boot/dts/bcm-ns.dtsi
+++ b/arch/arm/boot/dts/bcm-ns.dtsi
@@ -176,14 +176,23 @@ chipcommon: chipcommon at 0 {
 
 		pcie0: pcie at 12000 {
 			reg = <0x00012000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
 		};
 
 		pcie1: pcie at 13000 {
 			reg = <0x00013000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
 		};
 
 		pcie2: pcie at 14000 {
 			reg = <0x00014000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
 		};
 
 		usb2: usb2 at 21000 {
-- 
2.35.3