[PATCH AUTOSEL 5.10 08/14] ARM: dts: Fix erroneous ADS touchscreen polarities
Sasha Levin
sashal at kernel.org
Fri Jun 16 03:27:45 PDT 2023
From: Linus Walleij <linus.walleij at linaro.org>
[ Upstream commit 4a672d500bfd6bb87092c33d5a2572c3d0a1cf83 ]
Several device tree files get the polarity of the pendown-gpios
wrong: this signal is active low. Fix up all incorrect flags, so
that operating systems can rely on the flag being correctly set.
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
Link: https://lore.kernel.org/r/20230510105156.1134320-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 2 +-
arch/arm/boot/dts/at91sam9261ek.dts | 2 +-
arch/arm/boot/dts/imx7d-pico-hobbit.dts | 2 +-
arch/arm/boot/dts/imx7d-sdb.dts | 2 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +-
arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi | 2 +-
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi | 2 +-
arch/arm/boot/dts/omap3-pandora-common.dtsi | 2 +-
arch/arm/boot/dts/omap5-cm-t54.dts | 2 +-
11 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index aed81568a297d..d783d1f6950be 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -527,7 +527,7 @@ touchscreen at 1 {
interrupt-parent = <&gpio1>;
interrupts = <31 0>;
- pendown-gpio = <&gpio1 31 0>;
+ pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index beed819609e8d..8f3b483bb64dd 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -156,7 +156,7 @@ tsc2046 at 2 {
compatible = "ti,ads7843";
interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
spi-max-frequency = <3000000>;
- pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <150>;
ti,x-max = /bits/ 16 <3830>;
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index d917dc4f2f227..6ad39dca70096 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -64,7 +64,7 @@ ads7846 at 0 {
interrupt-parent = <&gpio2>;
interrupts = <7 0>;
spi-max-frequency = <1000000>;
- pendown-gpio = <&gpio2 7 0>;
+ pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
vcc-supply = <®_3p3v>;
ti,x-min = /bits/ 16 <0>;
ti,x-max = /bits/ 16 <4095>;
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 6d562ebe90295..d3b49a5b30b72 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -198,7 +198,7 @@ tsc2046 at 0 {
pinctrl-0 = <&pinctrl_tsc2046_pendown>;
interrupt-parent = <&gpio2>;
interrupts = <29 0>;
- pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
touchscreen-max-pressure = <255>;
wakeup-source;
};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index e61b8a2bfb7de..51baedf1603bd 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -227,7 +227,7 @@ ads7846 at 0 {
interrupt-parent = <&gpio2>;
interrupts = <25 0>; /* gpio_57 */
- pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index 3decc2d78a6ca..a7f99ae0c1fe9 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -54,7 +54,7 @@ ads7846 at 0 {
interrupt-parent = <&gpio1>;
interrupts = <27 0>; /* gpio_27 */
- pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 73d477898ec2a..06e7cf96c6639 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -311,7 +311,7 @@ tsc2046 at 0 {
interrupt-parent = <&gpio1>;
interrupts = <8 0>; /* boot6 / gpio_8 */
spi-max-frequency = <1000000>;
- pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
vcc-supply = <®_vcc3>;
pinctrl-names = "default";
pinctrl-0 = <&tsc2048_pins>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 1d6e88f99eb31..c3570acc35fad 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -149,7 +149,7 @@ ads7846 at 0 {
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 7e30f9d45790e..d95a0e130058c 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -160,7 +160,7 @@ ads7846 at 0 {
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 37608af6c07f5..ca6d777ebf843 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -651,7 +651,7 @@ tsc2046 at 0 {
pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */
- pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
vcc-supply = <&vaux4>;
ti,x-min = /bits/ 16 <0>;
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index ca759b7b8a580..e62ea8b6d53fd 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -354,7 +354,7 @@ ads7846 at 0 {
interrupt-parent = <&gpio1>;
interrupts = <15 0>; /* gpio1_wk15 */
- pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <0x0>;
--
2.39.2
More information about the linux-arm-kernel
mailing list