[PATCH net v5 2/6] net: dsa: mt7530: fix trapping frames on non-MT7621 SoC MT7530 switch

[Russell King (Oracle)]

On Fri, Jun 16, 2023 at 01:03:14PM +0300, Vladimir Oltean wrote:
> On Fri, Jun 16, 2023 at 05:53:23AM +0300, arinc9.unal at gmail.com wrote:
> > From: Arınç ÜNAL <arinc.unal at arinc9.com>
> > 
> > The check for setting the CPU_PORT bits must include the non-MT7621 SoC
> > MT7530 switch variants to trap frames. Expand the check to include them.
> > 
> > Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
> > Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
> > ---
> 
> why do you say non-MT7621 when the change specifically includes MT7621?
> What is the affected SoC then?

Thanks for falling into one of the issues that makes reviewing these
patches difficult. :/

> > -	if (priv->id == ID_MT7621)
> > +	if (priv->id == ID_MT7530 || priv->id == ID_MT7621)
> >  		mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));

I *think* what the commit message should be saying is that the setup
for the CPU port(*) is necessary not only for MT7621, but also for
MT7530 variants as well.

That can be construed from the commit message, but it doesn't easily
read that way.

* - in this case, it's the CPU port field and the CPU enable bit.
Note that CPU_MASK only covers CPU_PORT() and not CPU_EN, but this
doesn't matter for mt7530_rmw().

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!