[PATCH] remoteproc: stm32: use correct format strings on 64-bit

[Randy Dunlap]

On 6/9/23 05:05, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd at arndb.de>
> 
> With CONFIG_ARCH_STM32 making it into arch/arm64, a couple of format
> strings no longer work, since they rely on size_t being compatible
> with %x, or they print an 'int' using %z:
> 
> drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_mem_alloc':
> drivers/remoteproc/stm32_rproc.c:122:22: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=]
> drivers/remoteproc/stm32_rproc.c:122:40: note: format string is defined here
>   122 |         dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len);
>       |                                       ~^
>       |                                        |
>       |                                        unsigned int
>       |                                       %lx
> drivers/remoteproc/stm32_rproc.c:125:30: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'size_t' {aka 'long unsigned int'} [-Werror=format=]
> drivers/remoteproc/stm32_rproc.c:125:65: note: format string is defined here
>   125 |                 dev_err(dev, "Unable to map memory region: %pa+%x\n",
>       |                                                                ~^
>       |                                                                 |
>       |                                                                 unsigned int
>       |                                                                %lx
> drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_get_loaded_rsc_table':
> drivers/remoteproc/stm32_rproc.c:646:30: error: format '%zx' expects argument of type 'size_t', but argument 4 has type 'int' [-Werror=format=]
> drivers/remoteproc/stm32_rproc.c:646:66: note: format string is defined here
>   646 |                 dev_err(dev, "Unable to map memory region: %pa+%zx\n",
>       |                                                                ~~^
>       |                                                                  |
>       |                                                                  long unsigned int
>       |                                                                %x
> 
> Fix up all three instances to work across architectures, and enable
> compile testing for this driver to ensure it builds everywhere.
> 
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>

Acked-by: Randy Dunlap <rdunlap at infradead.org>
Tested-by: Randy Dunlap <rdunlap at infradead.org> # build-tested

Thanks.

> ---
>  drivers/remoteproc/Kconfig       | 2 +-
>  drivers/remoteproc/stm32_rproc.c | 6 +++---
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index a850e9f486dd6..48845dc8fa852 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -313,7 +313,7 @@ config ST_SLIM_REMOTEPROC
>  
>  config STM32_RPROC
>  	tristate "STM32 remoteproc support"
> -	depends on ARCH_STM32
> +	depends on ARCH_STM32 || COMPILE_TEST
>  	depends on REMOTEPROC
>  	select MAILBOX
>  	help
> diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
> index a7457777aae43..cf073bac79f73 100644
> --- a/drivers/remoteproc/stm32_rproc.c
> +++ b/drivers/remoteproc/stm32_rproc.c
> @@ -119,10 +119,10 @@ static int stm32_rproc_mem_alloc(struct rproc *rproc,
>  	struct device *dev = rproc->dev.parent;
>  	void *va;
>  
> -	dev_dbg(dev, "map memory: %pa+%x\n", &mem->dma, mem->len);
> +	dev_dbg(dev, "map memory: %pad+%zx\n", &mem->dma, mem->len);
>  	va = ioremap_wc(mem->dma, mem->len);
>  	if (IS_ERR_OR_NULL(va)) {
> -		dev_err(dev, "Unable to map memory region: %pa+%x\n",
> +		dev_err(dev, "Unable to map memory region: %pad+0x%zx\n",
>  			&mem->dma, mem->len);
>  		return -ENOMEM;
>  	}
> @@ -643,7 +643,7 @@ stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz)
>  
>  	ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE);
>  	if (IS_ERR_OR_NULL(ddata->rsc_va)) {
> -		dev_err(dev, "Unable to map memory region: %pa+%zx\n",
> +		dev_err(dev, "Unable to map memory region: %pa+%x\n",
>  			&rsc_pa, RSC_TBL_SIZE);
>  		ddata->rsc_va = NULL;
>  		return ERR_PTR(-ENOMEM);

-- 
~Randy