[PATCH 2/6] dt-bindings: clock: Bindings for Meson T7 clock controller

[Rob Herring]

On Thu, 15 Jun 2023 19:29:34 +0100, Lucas Tanure wrote:
> Add documentation for T7 the clock controller.
> 
> Signed-off-by: Lucas Tanure <tanure at linux.com>
> ---
>  .../bindings/clock/amlogic,mesont7.yaml       |  69 +++
>  include/dt-bindings/clock/mesont7-clkc.h      | 487 ++++++++++++++++++
>  2 files changed, 556 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
>  create mode 100644 include/dt-bindings/clock/mesont7-clkc.h
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename
 	 $id: http://devicetree.org/schemas/clock/amlogic,mesont7-clk.yaml
 	file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,mesont7.yaml
Documentation/devicetree/bindings/clock/amlogic,mesont7.example.dts:18.32-28.11: Warning (unit_address_vs_reg): /example-0/clock-controller: node has a reg or ranges property, but no unit name
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,mesont7.example.dtb: clock-controller: reg: [[0, 0], [0, 1180], [0, 32768], [0, 800], [0, 57408], [0, 188]] is too long
	from schema $id: http://devicetree.org/schemas/clock/amlogic,mesont7-clk.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230615182938.18487-3-tanure@linux.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.