[PATCH v2 1/3] dt-bindings: extcon-usb-gpio: convert to DT schema format

[Alexander Stein]

Convert the binding to DT schema format. Change the GPIO properties to new
naming convention using -gpios as well.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
Changes in v2:
* Mark extcon-usb-gpio as deprecated
* Fix YAML format
* Fix example node
* Remove unneeded consumer node in example

 .../bindings/extcon/extcon-usb-gpio.txt       | 21 --------
 .../bindings/extcon/extcon-usb-gpio.yaml      | 51 +++++++++++++++++++
 2 files changed, 51 insertions(+), 21 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml

diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
deleted file mode 100644
index dfc14f71e81fb..0000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-USB GPIO Extcon device
-
-This is a virtual device used to generate USB cable states from the USB ID pin
-connected to a GPIO pin.
-
-Required properties:
-- compatible: Should be "linux,extcon-usb-gpio"
-
-Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
-- id-gpio: gpio for USB ID pin. See gpio binding.
-- vbus-gpio: gpio for USB VBUS pin.
-
-Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
-	extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
-	}
-
-	&omap_dwc3_1 {
-		extcon = <&extcon_usb1>;
-	};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml
new file mode 100644
index 0000000000000..136f865b87816
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-usb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB GPIO Extcon device
+
+maintainers:
+  - Alexander Stein <alexander.stein at ew.tq-group.com>
+
+description:
+  This is a virtual device used to generate USB cable states from the
+  USB ID pin connected to a GPIO pin.
+  Deprecated, use USB connector node instead.
+
+deprecated: true
+
+properties:
+  compatible:
+    const: linux,extcon-usb-gpio
+
+  id-gpios:
+    description: An input gpio for USB ID pin.
+    maxItems: 1
+
+  vbus-gpios:
+    description: An input gpio for USB VBus pin, used to detect presence of
+      VBUS 5V.
+    maxItems: 1
+
+required:
+  - compatible
+
+anyOf:
+  - required:
+      - id-gpios
+  - required:
+      - vbus-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    extcon-usb1 {
+      compatible = "linux,extcon-usb-gpio";
+      id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+      vbus-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+    };
-- 
2.34.1