[PATCH v5 00/25] Add perf support to the rockchip-dfi driver

[Sascha Hauer]

On Wed, Jun 14, 2023 at 03:40:34PM +0200, Sebastian Reichel wrote:
> Hi,
> 
> On Wed, May 24, 2023 at 10:31:28AM +0200, Sascha Hauer wrote:
> > This is v5 of the series adding perf support to the rockchip DFI driver.
> > 
> > A lot has changed in the perf driver since v4. First of all the review
> > feedback from Robin and Jonathan has been integrated. The perf driver
> > now not only supports monitoring the total DDR utilization, but also the
> > individual channels. I also reworked the way the raw 32bit counter
> > values are summed up to 64bit perf values, so hopefully the code is
> > easier to follow now.
> > 
> > lockdep found out that that locking in the perf driver was broken, so I
> > reworked that as well. None of the perf hooks allows locking with
> > mutexes or spinlocks, so in perf it's not possible to enable the DFI
> > controller when needed. Instead I now unconditionally enable the DFI
> > controller during probe when perf is enabled.
> > 
> > Furthermore the hrtimer I use for reading out the hardware counter
> > values before they overflow race with perf. Now a seqlock is used to
> > prevent that.
> > 
> > The RK3588 device tree changes for the DFI were not part of v4. As
> > Vincent Legoll showed interest in testing this series the necessary
> > device tree changes are now part of this series.
> 
> I tested the series on RK3588 EVB1. The read/write byts looks
> sensible. Sometimes cycles reads unrealistic values, though:
> 
>  Performance counter stats for 'system wide':
> 
> 18446744070475110400      rockchip_ddr/cycles/

This goes down to missing initialization of &dfi->last_perf_count, see
my other mail. Will fix this in the next round.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |