[PATCH v2 19/23] arm64: dts: qcom: sa8775p: add the SGMII PHY node

[Konrad Dybcio]

On 15.06.2023 14:14, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
> 
> Add the internal SGMII/SerDes PHY node for sa8775p platforms.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index b130136acffe..b6d95813c98c 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -1837,6 +1837,15 @@ adreno_smmu: iommu at 3da0000 {
>  				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
>  		};
>  
> +		serdes0: phy at 8901000 {
> +			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
> +			reg = <0x0 0x08901000 0x0 0xe10>;
> +			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
> +			clock-names = "sgmi_ref";
> +			#phy-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		pdc: interrupt-controller at b220000 {
>  			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
>  			reg = <0x0 0x0b220000 0x0 0x30000>,