[PATCH 0/2] Add R5F and C7x DSP nodes for AM62a SoC

[Vignesh Raghavendra]

On 02/05/23 19:44, Hari Nagalla wrote:
> This series adds the R5F processor nodes and C7x DSP node for
> AM62a SoC.
> 
> The first patch adds the nodes to the SoC device tree and the second
> patch reserves the memory for remote rpoc IPCs on AM62a-SK.
> 
> Hari Nagalla (2):
>   arm64: dts: ti: k3-am62a: Add remote proc nodes
>   arm64: dts: ti: k3-am62a7-sk: Enable remote proc nodes
> 
>  arch/arm64/boot/dts/ti/k3-am62a-main.dtsi   | 11 ++++
>  arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi    | 23 +++++++
>  arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 23 +++++++
>  arch/arm64/boot/dts/ti/k3-am62a7-sk.dts     | 69 +++++++++++++++++++++
>  4 files changed, 126 insertions(+)
> 

Please fix dtbs_check issues:

+arch/arm64/boot/dts/ti/k3-am62a7-sk.dts: /bus at f0000/mailbox at 29020000/mbox-mcu_r5-0: Character '_' not recommended in node name
+/workdir/arch/arm64/boot/dts/ti/k3-am62a7-sk.dtb: dsp at 7e000000: reg: [[0, 2113929216, 0, 1048576]] is too short
+/workdir/arch/arm64/boot/dts/ti/k3-am62a7-sk.dtb: dsp at 7e000000: reg-names: ['l2sram'] is too short
+/workdir/arch/arm64/boot/dts/ti/k3-am62a7-sk.dtb: dsp at 7e000000: Unevaluated properties are not allowed ('reg', 'reg-names' were unexpected)
+arch/arm64/boot/dts/ti/k3-am62a7-sk.dts: /bus at f0000/mailbox at 29020000/mbox-mcu_r5-0: Character '_' not recommended in node name
+/workdir/arch/arm64/boot/dts/ti/k3-am62a7-sk.dtb: mailbox at 29020000: 'mbox-mcu_r5-0' does not match any of the regexes: '^mbox-[a-z0-9-]+$', 'pinctrl-[0-9]+'


-- 
Regards
Vignesh