[PATCH] drivers/thunder:improve-warning-message-in-device_for_each_child_node()
Wang Ming
machel at vivo.com
Tue Jun 13 05:38:15 PDT 2023
In device_for_each_child_node(), it should have fwnode_handle_put()
before break to prevent stale device node references from being
left behind.
Signed-off-by: Wang Ming <machel at vivo.com>
---
.../net/ethernet/cavium/thunder/thunder_bgx.c | 37 ++++++++++---------
1 file changed, 20 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
index a317feb8d..d37ee2872 100644
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
@@ -90,7 +90,7 @@ static const struct pci_device_id bgx_id_table[] = {
MODULE_AUTHOR("Cavium Inc");
MODULE_DESCRIPTION("Cavium Thunder BGX/MAC Driver");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, bgx_id_table);
@@ -174,10 +174,10 @@ static struct bgx *get_bgx(int node, int bgx_idx)
}
/* Return number of BGX present in HW */
-unsigned bgx_get_map(int node)
+unsigned int bgx_get_map(int node)
{
int i;
- unsigned map = 0;
+ unsigned int map = 0;
for (i = 0; i < max_bgx_per_node; i++) {
if (bgx_vnic[(node * max_bgx_per_node) + i])
@@ -600,9 +600,9 @@ static void bgx_lmac_handler(struct net_device *netdev)
link_changed = -1;
if (phydev->link &&
- (lmac->last_duplex != phydev->duplex ||
- lmac->last_link != phydev->link ||
- lmac->last_speed != phydev->speed)) {
+ (lmac->last_duplex != phydev->duplex ||
+ lmac->last_link != phydev->link ||
+ lmac->last_speed != phydev->speed)) {
link_changed = 1;
}
@@ -783,7 +783,7 @@ static int bgx_lmac_xaui_init(struct bgx *bgx, struct lmac *lmac)
bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LD_REP, 0x00);
/* training enable */
bgx_reg_modify(bgx, lmacid,
- BGX_SPUX_BR_PMD_CRTL, SPU_PMD_CRTL_TRAIN_EN);
+ BGX_SPUX_BR_PMD_CRTL, SPU_PMD_CRTL_TRAIN_EN);
}
/* Append FCS to each packet */
@@ -1059,8 +1059,8 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid)
lmac->bgx = bgx;
if ((lmac->lmac_type == BGX_MODE_SGMII) ||
- (lmac->lmac_type == BGX_MODE_QSGMII) ||
- (lmac->lmac_type == BGX_MODE_RGMII)) {
+ (lmac->lmac_type == BGX_MODE_QSGMII) ||
+ (lmac->lmac_type == BGX_MODE_RGMII)) {
lmac->is_sgmii = true;
if (bgx_lmac_sgmii_init(bgx, lmac))
return -1;
@@ -1096,9 +1096,9 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid)
bgx_reg_write(bgx, lmacid, BGX_CMRX_RX_DMAC_CTL, 0x03);
if ((lmac->lmac_type != BGX_MODE_XFI) &&
- (lmac->lmac_type != BGX_MODE_XLAUI) &&
- (lmac->lmac_type != BGX_MODE_40G_KR) &&
- (lmac->lmac_type != BGX_MODE_10G_KR)) {
+ (lmac->lmac_type != BGX_MODE_XLAUI) &&
+ (lmac->lmac_type != BGX_MODE_40G_KR) &&
+ (lmac->lmac_type != BGX_MODE_10G_KR)) {
if (!lmac->phydev) {
if (lmac->autoneg) {
bgx_reg_write(bgx, lmacid,
@@ -1178,9 +1178,9 @@ static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid)
kfree(lmac->dmacs);
if ((lmac->lmac_type != BGX_MODE_XFI) &&
- (lmac->lmac_type != BGX_MODE_XLAUI) &&
- (lmac->lmac_type != BGX_MODE_40G_KR) &&
- (lmac->lmac_type != BGX_MODE_10G_KR) && lmac->phydev)
+ (lmac->lmac_type != BGX_MODE_XLAUI) &&
+ (lmac->lmac_type != BGX_MODE_40G_KR) &&
+ (lmac->lmac_type != BGX_MODE_10G_KR) && lmac->phydev)
phy_disconnect(lmac->phydev);
lmac->phydev = NULL;
@@ -1199,7 +1199,7 @@ static void bgx_init_hw(struct bgx *bgx)
for (i = 0; i < bgx->lmac_count; i++) {
lmac = &bgx->lmac[i];
bgx_reg_write(bgx, i, BGX_CMRX_CFG,
- (lmac->lmac_type << 8) | lmac->lane_to_sds);
+ (lmac->lmac_type << 8) | lmac->lane_to_sds);
bgx->lmac[i].lmacid_bd = lmac_count;
lmac_count++;
}
@@ -1478,8 +1478,10 @@ static int bgx_init_of_phy(struct bgx *bgx)
* cannot handle it, so exit the loop.
*/
node = to_of_node(fwn);
- if (!node)
+ if (!node) {
+ fwnode_handle_put(fwn);
break;
+ }
of_get_mac_address(node, bgx->lmac[lmac].mac);
@@ -1503,6 +1505,7 @@ static int bgx_init_of_phy(struct bgx *bgx)
lmac++;
if (lmac == bgx->max_lmac) {
of_node_put(node);
+ fwnode_handle_put(fwn);
break;
}
}
--
2.25.1
________________________________
本邮件及其附件内容可能含有机密和/或隐私信息,仅供指定个人或机构使用。若您非发件人指定收件人或其代理人,请勿使用、传播、复制或存储此邮件之任何内容或其附件。如您误收本邮件,请即以回复或电话方式通知发件人,并将原始邮件、附件及其所有复本删除。谢谢。
The contents of this message and any attachments may contain confidential and/or privileged information and are intended exclusively for the addressee(s). If you are not the intended recipient of this message or their agent, please note that any use, dissemination, copying, or storage of this message or its attachments is not allowed. If you receive this message in error, please notify the sender by reply the message or phone and delete this message, any attachments and any copies immediately.
Thank you
More information about the linux-arm-kernel
mailing list