[PATCH v4 5/8] drm/mediatek: hdmi: add v2 support

[CK Hu (胡俊光)]

Hi, Guillaume:

On Mon, 2023-05-29 at 16:31 +0200, Guillaume Ranquet wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  Adds hdmi and hdmi-ddc support for v2 IP.
> 
> Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> ---

[snip]

> +
> +static bool fg_ddc_data_read(struct mtk_hdmi_ddc *ddc,
> +      unsigned char b_dev,
> +      unsigned char b_data_addr,
> +      unsigned char b_data_count,
> +      unsigned char *pr_data)
> +{
> +int ret;
> +
> +mutex_lock(&ddc->mtx);

Why do you need this mutex? fg_ddc_data_read() and fg_ddc_data_write()
are called by mtk_hdmi_ddc_xfer() which is the callback function of
master_xfer. In original hdmi driver, it's not necessary to use a mutex
to protect master_xfer, so I think this is not necessary.

Regards,
CK

> +
> +hdmi_ddc_request(ddc);
> +ret = vddc_read(ddc, DDC2_CLOK, b_dev, b_data_addr, SIF_8_BIT_HDMI,
> +      pr_data, b_data_count);
> +mutex_unlock(&ddc->mtx);
> +
> +return ret == b_data_count;
> +}
> +
> +static void fg_ddc_data_write(struct mtk_hdmi_ddc *ddc,
> +       unsigned char b_dev,
> +       unsigned char b_data_addr,
> +       unsigned char b_data_count,
> +       unsigned char *pr_data)
> +{
> +unsigned int i;
> +
> +mutex_lock(&ddc->mtx);
> +
> +hdmi_ddc_request(ddc);
> +for (i = 0; i < b_data_count; i++)
> +mtk_ddc_wr_one(ddc, b_dev, b_data_addr + i, *(pr_data + i));
> +
> +mutex_unlock(&ddc->mtx);
> +}
> +
> +static int mtk_hdmi_ddc_xfer(struct i2c_adapter *adapter, struct
> i2c_msg *msgs,
> +     int num)
> +{
> +struct mtk_hdmi_ddc *ddc = adapter->algo_data;
> +struct device *dev = adapter->dev.parent;
> +bool ret;
> +int i;
> +unsigned char offset;
> +
> +if (!ddc)
> +return -EINVAL;
> +
> +for (i = 0; i < num; i++) {
> +struct i2c_msg *msg = &msgs[i];
> +
> +if (msg->flags & I2C_M_RD) {
> +/* The underlying DDC hardware always issue a write request
> + * that assigns the read offset as part of the read operation.
> + * Therefore we need to use the offset value assigned
> + * in the previous write request from the drm_edid.c
> + */
> +ret = fg_ddc_data_read(ddc, msg->addr,
> +       offset, /* determined by previous write requests */
> +       (msg->len), &msg->buf[0]);
> +if (!ret) {
> +dev_err(dev, "ddc read failed : %d\n", ret);
> +return ret;
> +}
> +} else {
> +fg_ddc_data_write(ddc, msg->addr, msg->buf[0],
> +(msg->len - 1), &msg->buf[1]);
> +
> +/* we store the offset value requested by drm_edid framework
> + * to use in subsequent read requests.
> + */
> +if (DDC_ADDR == msg->addr && 1 == msg->len)
> +offset = msg->buf[0];
> +}
> +}
> +
> +return i;
> +}
> +