[PATCH 15/26] net: stmmac: dwmac-qcom-ethqos: add support for the optional phy-supply

[Andrew Halaney]

On Mon, Jun 12, 2023 at 11:23:44AM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
> 
> On sa8775p-ride we need to enable the power supply for the external PHY.

Is this for the external phy? It doesn't seem like it from the board
schematic I have... the regulator never makes it out of the black box that
is the SIP/SOM if I'm reading right.

My (poor) understanding was this was for the serdes phy that's doing the
conversion to SGMII before hitting the board... good chance I'm wrong
though.

> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
> ---
>  drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> index 2f6b9b419601..21f329d2f7eb 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> @@ -8,6 +8,7 @@
>  #include <linux/phy.h>
>  #include <linux/phy/phy.h>
>  #include <linux/property.h>
> +#include <linux/regulator/consumer.h>
>  
>  #include "stmmac.h"
>  #include "stmmac_platform.h"
> @@ -692,6 +693,10 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto out_config_dt;
>  
> +	ret = devm_regulator_get_enable_optional(dev, "phy");
> +	if (ret < 0 && ret != -ENODEV)
> +		goto out_config_dt;
> +
>  	ethqos->serdes_phy = devm_phy_optional_get(dev, "serdes");
>  	if (IS_ERR(ethqos->serdes_phy)) {
>  		ret = PTR_ERR(ethqos->serdes_phy);
> -- 
> 2.39.2
>