[PATCH PULL] arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller

[Krzysztof Kozlowski]

From: Sam Protsenko <semen.protsenko at linaro.org>

As described in the corresponding binding documentation for
"samsung,exynos850-pmu", the "clocks" property should be used for
specifying CLKOUT mux inputs. Therefore, the clock provided to exynos850
pmu_system_controller is incorrect and should be removed. Instead of
making syscon regmap keep that clock running for PMU accesses, it should
be made always running in the clock driver, because the kernel is not
the only software accessing PMU registers on Exynos850 platform.

Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
Link: https://lore.kernel.org/r/20230308233822.31180-8-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm64/boot/dts/exynos/exynos850.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index d67e98120313..aa077008b3be 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -200,7 +200,6 @@ gic: interrupt-controller at 12a01000 {
 		pmu_system_controller: system-controller at 11860000 {
 			compatible = "samsung,exynos850-pmu", "syscon";
 			reg = <0x11860000 0x10000>;
-			clocks = <&cmu_apm CLK_GOUT_PMU_ALIVE_PCLK>;
 
 			reboot: syscon-reboot {
 				compatible = "syscon-reboot";
-- 
2.34.1