[PATCH 22/26] arm64: dts: qcom: sa8775p-ride: add the SGMII PHY node

Bartosz Golaszewski brgl at bgdev.pl
Mon Jun 12 02:23:51 PDT 2023


From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>

Add the internal SGMII/SerDes PHY node for sa8775p platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index b130136acffe..0e59000a0c82 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1837,6 +1837,15 @@ adreno_smmu: iommu at 3da0000 {
 				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		serdes_phy: phy at 8901000 {
+			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+			reg = <0 0x08901000 0 0xe10>;
+			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+			clock-names = "sgmi_ref";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		pdc: interrupt-controller at b220000 {
 			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x30000>,
-- 
2.39.2




More information about the linux-arm-kernel mailing list