[PATCH v2 1/3] tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error

[Christophe JAILLET]

If clk_get_rate() fails, the clk that has just been allocated needs to be
freed.

Cc: <stable at vger.kernel.org> # v3.3+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
Reviewed-by: Andi Shyti <andi.shyti at kernel.org>
Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup")
Signed-off-by: Christophe JAILLET <christophe.jaillet at wanadoo.fr>
---
v2: Add an error message    [Andi Shyti]
    Add Cc: stable          [Andi Shyti]
    Add R-b tags

v1: https://lore.kernel.org/all/e4359d5ef206f5b349c1d15a515a1205e78dda55.1686285892.git.christophe.jaillet@wanadoo.fr/

Slightly unsure if Krzysztof's R-b should be kept or not.
v2 is not the same as v1, but the change looks small.
Sorry if I did wrong.
---
 drivers/tty/serial/samsung_tty.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 2a7520ad3abd..a92a23e1964e 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -1459,8 +1459,12 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
 			continue;
 
 		rate = clk_get_rate(clk);
-		if (!rate)
+		if (!rate) {
+			dev_err(ourport->port.dev,
+				"Failed to get clock rate for %s.\n", clkname);
+			clk_put(clk);
 			continue;
+		}
 
 		if (ourport->info->has_divslot) {
 			unsigned long div = rate / req_baud;
-- 
2.34.1