[PATCH V11 06/10] arm64/perf: Enable branch stack events via FEAT_BRBE

Mark Rutland mark.rutland at arm.com
Fri Jun 9 05:42:34 PDT 2023


On Fri, Jun 09, 2023 at 10:17:19AM +0530, Anshuman Khandual wrote:
> On 6/5/23 19:13, Mark Rutland wrote:
> >> +/*
> >> + * A branch record with BRBINFx_EL1.LASTFAILED set, implies that all
> >> + * preceding consecutive branch records, that were in a transaction
> >> + * (i.e their BRBINFx_EL1.TX set) have been aborted.
> >> + *
> >> + * Similarly BRBFCR_EL1.LASTFAILED set, indicate that all preceding
> >> + * consecutive branch records up to the last record, which were in a
> >> + * transaction (i.e their BRBINFx_EL1.TX set) have been aborted.
> >> + *
> >> + * --------------------------------- -------------------
> >> + * | 00 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX success]
> >> + * --------------------------------- -------------------
> >> + * | 01 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX success]
> >> + * --------------------------------- -------------------
> >> + * | 02 | BRBSRC | BRBTGT | BRBINF | | TX = 0 | LF = 0 |
> >> + * --------------------------------- -------------------
> >> + * | 03 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
> >> + * --------------------------------- -------------------
> >> + * | 04 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
> >> + * --------------------------------- -------------------
> >> + * | 05 | BRBSRC | BRBTGT | BRBINF | | TX = 0 | LF = 1 |
> >> + * --------------------------------- -------------------
> >> + * | .. | BRBSRC | BRBTGT | BRBINF | | TX = 0 | LF = 0 |
> >> + * --------------------------------- -------------------
> >> + * | 61 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
> >> + * --------------------------------- -------------------
> >> + * | 62 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
> >> + * --------------------------------- -------------------
> >> + * | 63 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
> >> + * --------------------------------- -------------------
> >> + *
> >> + * BRBFCR_EL1.LASTFAILED == 1
> >> + *
> >> + * BRBFCR_EL1.LASTFAILED fails all those consecutive, in transaction
> >> + * branches records near the end of the BRBE buffer.
> >> + *
> >> + * Architecture does not guarantee a non transaction (TX = 0) branch
> >> + * record between two different transactions. So it is possible that
> >> + * a subsequent lastfailed record (TX = 0, LF = 1) might erroneously
> >> + * mark more than required transactions as aborted.
> >> + */
> > Linux doesn't currently support TME (and IIUC no-one has built it), so can't we
> > delete the transaction handling for now? We can add a comment with somehing like:
> > 
> > /*
> >  * TODO: add transaction handling for TME.
> >  */
> > 
> > Assuming no-one has built TME, we might also be able to get an architectural
> > fix to disambiguate the boundary between two transactions, and avoid the
> > problem described above.
> > 
> > [...]
> > 
> 
> OR can leave this unchanged for now. Then update it if and when the relevant
> architectural fix comes in. The current TME branch records handling here, is
> as per the current architectural specification.

My rationale for deleting it is that it cannot be used and cannot be tested,
since the kernel doesn't support TME, and there are no TME implementations out
there. If and when we support TME in the kernel, this is very likely to have
bit-rotted.

I'd be happy to link to the current version, e.g.

/*
 * TODO: add transaction handling for FEAT_TME. See:
 *
 * https://lore.kernel.org/linux-arm-kernel/20230531040428.501523-7-anshuman.khandual@arm.com/
 */

I do appreciate that time and effort has gone into writing this, but IMO it's
more distracting than helpful at present, and deleting it makes this easier to
review and maintain.

Thanks,
Mark.



More information about the linux-arm-kernel mailing list