[PATCH 1/9] regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
Chen-Yu Tsai
wenst at chromium.org
Fri Jun 9 01:29:58 PDT 2023
The ldo_vcn33_bt and ldo_vcn33_wifi regulators are actually the same
regulator, having the same voltage setting and output pin. There are
simply two enable bits that are ORed together to enable the regulator.
Having two regulators representing the same output pin is misleading
from a design matching standpoint, and also error-prone in driver
implementations.
Merge the two as ldo_vcn33. Neither vcn33 regulators are referenced
in upstream device trees. As far as hardware designs go, none of the
Chromebooks using MT8183 w/ MT6358 use this output.
Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
---
.../bindings/regulator/mt6358-regulator.txt | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
index 7034cdca54e0..b22b956d1cbe 100644
--- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
@@ -15,8 +15,7 @@ LDO:
ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18,
ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12,
- ldo_vrf18, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
- ldo_vsim2
+ ldo_vrf18, ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2
Example:
@@ -305,15 +304,8 @@ Example:
regulator-enable-ramp-delay = <120>;
};
- mt6358_vcn33_bt_reg: ldo_vcn33_bt {
- regulator-name = "vcn33_bt";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3500000>;
- regulator-enable-ramp-delay = <270>;
- };
-
- mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
- regulator-name = "vcn33_wifi";
+ mt6358_vcn33_reg: ldo_vcn33 {
+ regulator-name = "vcn33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3500000>;
regulator-enable-ramp-delay = <270>;
--
2.41.0.162.gfafddb0af9-goog
More information about the linux-arm-kernel
mailing list