[PATCH v4 1/8] dt-bindings: display: mediatek: add MT8195 hdmi bindings

Rob Herring robh at kernel.org
Thu Jun 8 14:05:04 PDT 2023


On Mon, May 29, 2023 at 04:30:58PM +0200, Guillaume Ranquet wrote:
> Add mt8195 SoC bindings for hdmi and hdmi-ddc
> 
> On mt8195 the ddc i2c controller is part of the hdmi IP block and thus has no
> specific register range, power domain or interrupt, making it simpler
> than the legacy "mediatek,hdmi-ddc" binding.
> 
> Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> ---
>  .../bindings/display/mediatek/mediatek,hdmi.yaml   | 59 ++++++++++++++++++----
>  .../display/mediatek/mediatek,mt8195-hdmi-ddc.yaml | 45 +++++++++++++++++
>  2 files changed, 93 insertions(+), 11 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> index b90b6d18a828..4f62e6b94048 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> @@ -21,6 +21,7 @@ properties:
>        - mediatek,mt7623-hdmi
>        - mediatek,mt8167-hdmi
>        - mediatek,mt8173-hdmi
> +      - mediatek,mt8195-hdmi
>  
>    reg:
>      maxItems: 1
> @@ -29,18 +30,10 @@ properties:
>      maxItems: 1
>  
>    clocks:
> -    items:
> -      - description: Pixel Clock
> -      - description: HDMI PLL
> -      - description: Bit Clock
> -      - description: S/PDIF Clock
> +    maxItems: 4
>  
>    clock-names:
> -    items:
> -      - const: pixel
> -      - const: pll
> -      - const: bclk
> -      - const: spdif
> +    maxItems: 4
>  
>    phys:
>      maxItems: 1
> @@ -58,6 +51,9 @@ properties:
>      description: |
>        phandle link and register offset to the system configuration registers.
>  
> +  power-domains:
> +    maxItems: 1
> +
>    ports:
>      $ref: /schemas/graph.yaml#/properties/ports
>  
> @@ -86,9 +82,50 @@ required:
>    - clock-names
>    - phys
>    - phy-names
> -  - mediatek,syscon-hdmi
>    - ports
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mediatek,mt8195-hdmi
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: APB
> +            - description: HDCP
> +            - description: HDCP 24M
> +            - description: Split HDMI
> +        clock-names:
> +          items:
> +            - const: hdmi_apb_sel
> +            - const: hdcp_sel
> +            - const: hdcp24_sel
> +            - const: split_hdmi
> +
> +      required:
> +        - power-domains
> +    else:
> +      properties:
> +        clocks:
> +          items:
> +            - description: Pixel Clock
> +            - description: HDMI PLL
> +            - description: Bit Clock
> +            - description: S/PDIF Clock
> +
> +        clock-names:
> +          items:
> +            - const: pixel
> +            - const: pll
> +            - const: bclk
> +            - const: spdif

I don't understand how the same h/w block can have completely different 
clocks. If not the same h/w or evolution of the same h/w, then do a 
separate schema.

> +
> +      required:
> +        - mediatek,syscon-hdmi
> +
>  additionalProperties: false
>  
>  examples:
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
> new file mode 100644
> index 000000000000..84c096835b47
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek HDMI DDC for mt8195
> +
> +maintainers:
> +  - CK Hu <ck.hu at mediatek.com>
> +  - Jitao shi <jitao.shi at mediatek.com>
> +
> +description: |
> +  The HDMI DDC i2c controller is used to interface with the HDMI DDC pins.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - mediatek,mt8195-hdmi-ddc
> +
> +  clocks:
> +    maxItems: 1
> +
> +  mediatek,hdmi:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      A phandle to the mt8195 hdmi controller
> +
> +required:
> +  - compatible
> +  - clocks
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    hdmiddc0: i2c {
> +      compatible = "mediatek,mt8195-hdmi-ddc";
> +      mediatek,hdmi = <&hdmi0>;
> +      clocks = <&clk26m>;

How does one access this h/w device? There is nothing described to 
access it.

Rob



More information about the linux-arm-kernel mailing list