[PATCH v2 2/5] media: dt-bindings: mediatek,vcodec: Remove VDEC_SYS for mt8183

[Conor Dooley]

On Wed, Jun 07, 2023 at 04:53:39PM -0400, Nícolas F. R. A. Prado wrote:
> The binding expects the first register space to be VDEC_SYS. But on
> mt8183, which uses the stateless decoders, this space is used only for
> controlling clocks and resets, which are better described as separate
> clock-controller and reset-controller nodes.
> 
> In fact, in mt8173's devicetree there are already such separate
> clock-controller nodes, which cause duplicate addresses between the
> vdecsys node and the vcodec node. But for this SoC, since the stateful
> decoder code makes other uses of the VDEC_SYS register space, it's not
> straightforward to remove it.
> 
> In order to avoid the same address conflict to happen on mt8183,
> since the only current use of the VDEC_SYS register space in
> the driver is to read the status of a clock that indicates the hardware
> is active, remove the VDEC_SYS register space from the binding and
> describe an extra clock that will be used to directly check the hardware
> status.
> 
> While adding the active clock, split the mt8183 clocks since there are
> less of them than in mt8173. This is done in this same commit to avoid
> changing the number of clocks twice.
> 
> Also add reg-names to be able to tell that this new register schema is
> used, so the driver can keep backward compatibility.

Rationale here seems to make sense to me & seems like whatever
functionality, or lack thereof, for the mt8183 will be preserved w/ the
old devicetree.
Reviewed-by: Conor Dooley <conor.dooley at microchip.com>

Cheers,
Conor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230608/e781e370/attachment.sig>