[PATCH v1 6/8] ARM: dts: stm32: Add pinmux groups for Linux Automation GmbH TAC
Alexandre TORGUE
alexandre.torgue at foss.st.com
Thu Jun 8 06:02:34 PDT 2023
Hi
On 6/7/23 13:55, Leonard Göhrs wrote:
> Add pinmux groups required for the Linux Automation GmbH TAC.
>
> Signed-off-by: Leonard Göhrs <l.goehrs at pengutronix.de>
> ---
> arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 129 +++++++++++++++++++++++
> 1 file changed, 129 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> index e86d989dd351d..0c864461ca449 100644
> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> @@ -6,6 +6,17 @@
> #include <dt-bindings/pinctrl/stm32-pinfunc.h>
>
> &pinctrl {
> + adc1_ain_pins_a: adc1-ain-0 {
> + pins {
> + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* ADC1_INP2 */
> + <STM32_PINMUX('B', 1, ANALOG)>, /* ADC1_INP5 */
> + <STM32_PINMUX('B', 0, ANALOG)>, /* ADC1_INP9 */
> + <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1_INP10 */
> + <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1_INP13 */
> + <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1_INP15 */
> + };
> + };
> +
> adc1_in6_pins_a: adc1-in6-0 {
> pins {
> pinmux = <STM32_PINMUX('F', 12, ANALOG)>;
> @@ -341,6 +352,46 @@ pins1 {
> };
> };
>
> + ethernet0_rgmii_pins_d: rgmii-1 {
xxx_pins_d is already defined for rgmii-3, it should be xxx_pins_e
And rgmii-1 is already defined, it should be rgmii-4. Don't forget to
update boards files with new pinctrl names in eth node.
please rebase on top of stm32-next branch.
> + pins1 {
> + pinmux = <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
> + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
> + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
> + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
> + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
> + <STM32_PINMUX('B', 11, AF11)>; /* ETH_RGMII_TX_CTL */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <2>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
> + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
> + <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
> + <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
> + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
> + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
> + bias-disable;
> + };
> + };
> +
> + ethernet0_rgmii_sleep_pins_d: rgmii-sleep-1 {
xxx_pins_d is already defined for rgmii-3, it should be xxx_pins_e
rgmii-sleep-1 is already defined, it should be rgmii-sleep-4
> + pins1 {
> + pinmux = <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
> + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
> + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
> + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
> + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
> + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
> + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
> + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
> + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
> + <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
> + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
> + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
> + };
> + };
> +
> ethernet0_rmii_pins_a: rmii-0 {
> pins1 {
> pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
> @@ -1104,6 +1155,20 @@ pins {
> };
> };
>
> + pwm1_pins_c: pwm1-2 {
> + pins {
> + pinmux = <STM32_PINMUX('E', 11, AF1)>; /* TIM1_CH2 */
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + };
> +
> + pwm1_sleep_pins_c: pwm1-sleep-2 {
> + pins {
> + pinmux = <STM32_PINMUX('E', 11, ANALOG)>; /* TIM1_CH2 */
> + };
> + };
> +
> pwm2_pins_a: pwm2-0 {
> pins {
> pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
> @@ -1230,6 +1295,26 @@ pins {
> };
> };
>
> + pwm8_pins_b: pwm8-1 {
> + pins {
> + pinmux = <STM32_PINMUX('I', 5, AF3)>, /* TIM8_CH1 */
> + <STM32_PINMUX('I', 6, AF3)>, /* TIM8_CH2 */
> + <STM32_PINMUX('I', 7, AF3)>, /* TIM8_CH3 */
> + <STM32_PINMUX('C', 9, AF3)>; /* TIM8_CH4 */
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + };
> +
> + pwm8_sleep_pins_b: pwm8-sleep-1 {
> + pins {
> + pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* TIM8_CH1 */
> + <STM32_PINMUX('I', 6, ANALOG)>, /* TIM8_CH2 */
> + <STM32_PINMUX('I', 7, ANALOG)>, /* TIM8_CH3 */
> + <STM32_PINMUX('C', 9, ANALOG)>; /* TIM8_CH4 */
> + };
> + };
> +
> pwm12_pins_a: pwm12-0 {
> pins {
> pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
> @@ -1925,6 +2010,20 @@ pins2 {
> };
> };
>
> + spi2_pins_c: spi2-2 {
> + pins1 {
> + pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */
> + <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
> + bias-disable;
> + drive-push-pull;
> + };
> +
> + pins2 {
> + pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
> + bias-pull-down;
> + };
> + };
> +
> spi4_pins_a: spi4-0 {
> pins {
> pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
> @@ -1939,6 +2038,21 @@ pins2 {
> };
> };
>
> + spi5_pins_a: spi5-0 {
> + pins1 {
> + pinmux = <STM32_PINMUX('F', 7, AF5)>, /* SPI5_SCK */
> + <STM32_PINMUX('F', 9, AF5)>; /* SPI5_MOSI */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <1>;
> + };
> +
> + pins2 {
> + pinmux = <STM32_PINMUX('F', 8, AF5)>; /* SPI5_MISO */
> + bias-disable;
> + };
> + };
> +
> stusb1600_pins_a: stusb1600-0 {
> pins {
> pinmux = <STM32_PINMUX('I', 11, GPIO)>;
> @@ -2385,6 +2499,21 @@ pins {
> };
> };
>
> + usart3_pins_f: usart3-5 {
> + pins1 {
> + pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
> + <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <0>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
> + <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
> + bias-disable;
> + };
> + };
> +
> usbotg_hs_pins_a: usbotg-hs-0 {
> pins {
> pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
More information about the linux-arm-kernel
mailing list