[PATCH 5/5] ASoC: mediatek: mt8188-mt6359: Use bitfield macros for registers
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Thu Jun 8 01:47:27 PDT 2023
Replace open coded instances of FIELD_GET() with it, move register
definitions at the top of the file and also replace magic numbers
with register definitions.
While at it, also change a regmap_update_bits() call to regmap_write()
because the top 29 bits of AUD_TOP_CFG (31:3) are reserved (unused).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
sound/soc/mediatek/mt8188/mt8188-mt6359.c | 32 ++++++++++++++---------
1 file changed, 19 insertions(+), 13 deletions(-)
diff --git a/sound/soc/mediatek/mt8188/mt8188-mt6359.c b/sound/soc/mediatek/mt8188/mt8188-mt6359.c
index 5b2660139421..ac69c23e0da1 100644
--- a/sound/soc/mediatek/mt8188/mt8188-mt6359.c
+++ b/sound/soc/mediatek/mt8188/mt8188-mt6359.c
@@ -6,6 +6,7 @@
* Author: Trevor Wu <trevor.wu at mediatek.com>
*/
+#include <linux/bitfield.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/of_device.h>
@@ -19,6 +20,15 @@
#include "../common/mtk-afe-platform-driver.h"
#include "../common/mtk-soundcard-driver.h"
+#define CKSYS_AUD_TOP_CFG 0x032c
+ #define RG_TEST_ON BIT(0)
+ #define RG_TEST_TYPE BIT(2)
+#define CKSYS_AUD_TOP_MON 0x0330
+ #define TEST_MISO_COUNT_1 GENMASK(3, 0)
+ #define TEST_MISO_COUNT_2 GENMASK(7, 4)
+ #define TEST_MISO_DONE_1 BIT(28)
+ #define TEST_MISO_DONE_2 BIT(29)
+
#define NAU8825_HS_PRESENT BIT(0)
/*
@@ -251,9 +261,6 @@ static const struct snd_kcontrol_new mt8188_nau8825_controls[] = {
SOC_DAPM_PIN_SWITCH("Headphone Jack"),
};
-#define CKSYS_AUD_TOP_CFG 0x032c
-#define CKSYS_AUD_TOP_MON 0x0330
-
static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_component *cmpnt_afe =
@@ -265,13 +272,13 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd)
struct mtkaif_param *param;
int chosen_phase_1, chosen_phase_2;
int prev_cycle_1, prev_cycle_2;
- int test_done_1, test_done_2;
+ u8 test_done_1, test_done_2;
int cycle_1, cycle_2;
int mtkaif_chosen_phase[MT8188_MTKAIF_MISO_NUM];
int mtkaif_phase_cycle[MT8188_MTKAIF_MISO_NUM];
int mtkaif_calibration_num_phase;
bool mtkaif_calibration_ok;
- unsigned int monitor = 0;
+ u32 monitor = 0;
int counter;
int phase;
int i;
@@ -303,8 +310,7 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd)
mt6359_mtkaif_calibration_enable(cmpnt_codec);
/* set test type to synchronizer pulse */
- regmap_update_bits(afe_priv->topckgen,
- CKSYS_AUD_TOP_CFG, 0xffff, 0x4);
+ regmap_write(afe_priv->topckgen, CKSYS_AUD_TOP_CFG, RG_TEST_TYPE);
mtkaif_calibration_num_phase = 42; /* mt6359: 0 ~ 42 */
mtkaif_calibration_ok = true;
@@ -314,7 +320,7 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd)
mt6359_set_mtkaif_calibration_phase(cmpnt_codec,
phase, phase, phase);
- regmap_set_bits(afe_priv->topckgen, CKSYS_AUD_TOP_CFG, 0x1);
+ regmap_set_bits(afe_priv->topckgen, CKSYS_AUD_TOP_CFG, RG_TEST_ON);
test_done_1 = 0;
test_done_2 = 0;
@@ -326,14 +332,14 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd)
while (!(test_done_1 & test_done_2)) {
regmap_read(afe_priv->topckgen,
CKSYS_AUD_TOP_MON, &monitor);
- test_done_1 = (monitor >> 28) & 0x1;
- test_done_2 = (monitor >> 29) & 0x1;
+ test_done_1 = FIELD_GET(TEST_MISO_DONE_1, monitor);
+ test_done_2 = FIELD_GET(TEST_MISO_DONE_2, monitor);
if (test_done_1 == 1)
- cycle_1 = monitor & 0xf;
+ cycle_1 = FIELD_GET(TEST_MISO_COUNT_1, monitor);
if (test_done_2 == 1)
- cycle_2 = (monitor >> 4) & 0xf;
+ cycle_2 = FIELD_GET(TEST_MISO_COUNT_2, monitor);
/* handle if never test done */
if (++counter > 10000) {
@@ -361,7 +367,7 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd)
mtkaif_phase_cycle[MT8188_MTKAIF_MISO_1] = prev_cycle_2;
}
- regmap_clear_bits(afe_priv->topckgen, CKSYS_AUD_TOP_CFG, 0x1);
+ regmap_clear_bits(afe_priv->topckgen, CKSYS_AUD_TOP_CFG, RG_TEST_ON);
if (mtkaif_chosen_phase[MT8188_MTKAIF_MISO_0] >= 0 &&
mtkaif_chosen_phase[MT8188_MTKAIF_MISO_1] >= 0)
--
2.40.1
More information about the linux-arm-kernel
mailing list