[PATCH 0/9] Enable IPQ5332 USB2

[Varadarajan Narayanan]

This patch series adds the relevant phy and controller
configurations for enabling USB2 on IPQ5332

Depends On: https://lore.kernel.org/linux-arm-msm/cover.1686045347.git.quic_varada@quicinc.com/

Varadarajan Narayanan (9):
  dt-bindings: usb: dwc3: Add IPQ5332 compatible
  dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  phy: qcom-m31: Introduce qcom,m31 USB phy driver
  clk: qcom: ipq5332: Fix USB related clock defines
  phy: qcom-m31: Introduce qcom,m31 USB phy
  phy: qcom: Add qcom,m31 USB phy driver
  arm64: dts: qcom: ipq5332: Add USB related nodes
  arm64: dts: qcom: ipq5332: Enable USB
  arm64: defconfig: Enable QCOM M31 USB phy driver

 .../devicetree/bindings/phy/qcom,m31.yaml          |  69 ++++
 .../devicetree/bindings/usb/qcom,dwc3.yaml         |   2 +
 arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts        |   8 +
 arch/arm64/boot/dts/qcom/ipq5332.dtsi              |  55 ++++
 arch/arm64/configs/defconfig                       |   1 +
 drivers/clk/qcom/gcc-ipq5332.c                     |  34 +-
 drivers/phy/qualcomm/Kconfig                       |  11 +
 drivers/phy/qualcomm/Makefile                      |   1 +
 drivers/phy/qualcomm/phy-qcom-m31.c                | 360 +++++++++++++++++++++
 9 files changed, 530 insertions(+), 11 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,m31.yaml
 create mode 100644 drivers/phy/qualcomm/phy-qcom-m31.c

-- 
2.7.4