[PATCH v3] PCI: cadence: Fix Gen2 Link Retraining process

[Lorenzo Pieralisi]

On Wed, Jun 07, 2023 at 02:44:27PM +0530, Siddharth Vadapalli wrote:
> The Link Retraining process is initiated to account for the Gen2 defect in
> the Cadence PCIe controller in J721E SoC. The errata corresponding to this
> is i2085, documented at:
> https://www.ti.com/lit/er/sprz455c/sprz455c.pdf
> 
> The existing workaround implemented for the errata waits for the Data Link
> initialization to complete and assumes that the link retraining process
> at the Physical Layer has completed. However, it is possible that the
> Physical Layer training might be ongoing as indicated by the
> PCI_EXP_LNKSTA_LT bit in the PCI_EXP_LNKSTA register.
> 
> Fix the existing workaround, to ensure that the Physical Layer training
> has also completed, in addition to the Data Link initialization.
> 
> Fixes: 4740b969aaf5 ("PCI: cadence: Retrain Link to work around Gen2 training defect")
> Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
> Reviewed-by: Vignesh Raghavendra <vigneshr at ti.com>
> ---
> 
> Hello,
> 
> This patch is based on linux-next tagged next-20230606.
> 
> v2:
> https://lore.kernel.org/r/20230315070800.1615527-1-s-vadapalli@ti.com/
> Changes since v2:
> - Merge the cdns_pcie_host_training_complete() function with the
>   cdns_pcie_host_wait_for_link() function, as suggested by Bjorn
>   for the v2 patch.
> - Add dev_err() to notify when Link Training fails, since this is a
>   fatal error and proceeding from this point will almost always crash
>   the kernel.
> 
> v1:
> https://lore.kernel.org/r/20230102075656.260333-1-s-vadapalli@ti.com/
> Changes since v1:
> - Collect Reviewed-by tag from Vignesh Raghavendra.
> - Rebase on next-20230315.
> 
> Regards,
> Siddharth.
> 
>  .../controller/cadence/pcie-cadence-host.c    | 20 +++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
> index 940c7dd701d6..70a5f581ff4f 100644
> --- a/drivers/pci/controller/cadence/pcie-cadence-host.c
> +++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
> @@ -12,6 +12,8 @@
>  
>  #include "pcie-cadence.h"
>  
> +#define LINK_RETRAIN_TIMEOUT HZ
> +
>  static u64 bar_max_size[] = {
>  	[RP_BAR0] = _ULL(128 * SZ_2G),
>  	[RP_BAR1] = SZ_2G,
> @@ -80,8 +82,26 @@ static struct pci_ops cdns_pcie_host_ops = {
>  static int cdns_pcie_host_wait_for_link(struct cdns_pcie *pcie)
>  {
>  	struct device *dev = pcie->dev;
> +	unsigned long end_jiffies;
> +	u16 link_status;
>  	int retries;
>  
> +	/* Wait for link training to complete */
> +	end_jiffies = jiffies + LINK_RETRAIN_TIMEOUT;
> +	do {
> +		link_status = cdns_pcie_rp_readw(pcie, CDNS_PCIE_RP_CAP_OFFSET + PCI_EXP_LNKSTA);
> +		if (!(link_status & PCI_EXP_LNKSTA_LT))
> +			break;

You can use a bool variable eg link_trained and use that below.

> +		usleep_range(0, 1000);
> +	} while (time_before(jiffies, end_jiffies));
> +
> +	if (!(link_status & PCI_EXP_LNKSTA_LT)) {
> +		dev_info(dev, "Link training complete\n");
> +	} else {
> +		dev_err(dev, "Fatal! Link training incomplete\n");
> +		return -ETIMEDOUT;
> +	}

I don't necessarily see the reason why you are adding additional
logging, more so given that this now does not affect just the
workaround but all cadence controllers.

Actually, is that something you have tested and considered ?

Thanks,
Lorenzo

> +
>  	/* Check if the link is up or not */
>  	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
>  		if (cdns_pcie_link_up(pcie)) {
> -- 
> 2.25.1
>