[PATCH v1 1/6] dt-bindings: display/mediatek: mt8188: Add documentations for VDOSYS1

[Krzysztof Kozlowski]

On 07/06/2023 08:11, Hsiao Chien Sung wrote:
> Add device tree documentations for MT8188 VDOSYS1.

It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.

> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
> new file mode 100644
> index 000000000000..8a9e74cbf6dc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek PADDING
> +
> +maintainers:
> +  - Chun-Kuang Hu <chunkuang.hu at kernel.org>
> +  - Philipp Zabel <p.zabel at pengutronix.de>
> +
> +description:
> +  MediaTek PADDING provides ability to VDOSYS1 to fill pixels to
> +  width and height of a layer with a specified color.
> +  Since MIXER in VDOSYS1 requires the width of a layer to be 2-pixel-align, or
> +  4-pixel-align when ETHDR is enabled, we need PADDING to deal with odd width.
> +  Please notice that even if the PADDING is in bypass mode,
> +  settings in the registers must be cleared to 0, otherwise
> +  undeinfed behaviors could happen.

Typo, undefined

> +



> +required:
> +  - compatible
> +  - reg
> +  - power-domains
> +  - clocks
> +  - mediatek,gce-client-reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/mt8188-clk.h>
> +    #include <dt-bindings/power/mt8188-power.h>
> +    #include <dt-bindings/gce/mt8188-gce.h>
> +    #include <dt-bindings/memory/mt8188-memory-port.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        vdo1_padding0: vdo1_padding0 at 1c11d000 {

No underscores in node names.

Node names should be generic. See also explanation and list of examples
in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +            compatible = "mediatek,mt8188-vdo1-padding";
> +            reg = <0 0x1c11d000 0 0x1000>;
> +            clocks = <&vdosys1 CLK_VDO1_PADDING0>;
> +            power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
> +            mediatek,gce-client-reg =
> +                <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>;

Wrong wrapping. It's one line. Properties should not be wrapped after '='.


Best regards,
Krzysztof