[PATCH V2 12/14] arm64: dts: ti: k3-am65-iot*: Fixup reference to phandles array

[Nishanth Menon]

When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle and
cell arguments easier to catch. Fix the outliers to be consistent with
the rest of the usage.

Cc: Jan Kiszka <jan.kiszka at siemens.com>
Reviewed-by: Jan Kiszka <jan.kiszka at siemens.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
Changes from V1
* no change other than picking up Reviewed-by
V1: https://lore.kernel.org/r/20230601152636.858553-11-nm@ti.com

 .../boot/dts/ti/k3-am65-iot2050-common.dtsi    | 17 ++++++++---------
 .../dts/ti/k3-am6548-iot2050-advanced-m2.dts   | 18 ++++++++----------
 2 files changed, 16 insertions(+), 19 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 96ac2b476b11..ac5460bd0c52 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -385,13 +385,12 @@ &main_gpio0 {
 
 &wkup_gpio0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <
-		&arduino_io_d2_to_d3_pins_default
-		&arduino_i2c_aio_switch_pins_default
-		&arduino_io_oe_pins_default
-		&push_button_pins_default
-		&db9_com_mode_pins_default
-	>;
+	pinctrl-0 =
+		<&arduino_io_d2_to_d3_pins_default>,
+		<&arduino_i2c_aio_switch_pins_default>,
+		<&arduino_io_oe_pins_default>,
+		<&push_button_pins_default>,
+		<&db9_com_mode_pins_default>;
 	gpio-line-names =
 		/* 0..9 */
 		"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
@@ -712,11 +711,11 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
 &mcu_r5fss0_core0 {
 	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 			<&mcu_r5fss0_core0_memory_region>;
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
 };
 
 &mcu_r5fss0_core1 {
 	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
 			<&mcu_r5fss0_core1_memory_region>;
-	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
index 9400e35882a6..9209b5a7baa4 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -66,20 +66,18 @@ AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7)  /* (C23) GPIO1_89 */
 
 &main_gpio0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <
-		&main_m2_pcie_mux_control
-		&arduino_io_d4_to_d9_pins_default
-	>;
+	pinctrl-0 =
+		<&main_m2_pcie_mux_control>,
+		<&arduino_io_d4_to_d9_pins_default>;
 };
 
 &main_gpio1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <
-		&main_m2_enable_pins_default
-		&main_pmx0_m2_config_pins_default
-		&main_pmx1_m2_config_pins_default
-		&cp2102n_reset_pin_default
-	>;
+	pinctrl-0 =
+		<&main_m2_enable_pins_default>,
+		<&main_pmx0_m2_config_pins_default>,
+		<&main_pmx1_m2_config_pins_default>,
+		<&cp2102n_reset_pin_default>;
 };
 
 /*
-- 
2.40.0