[PATCH 0/3] TQMa8Xx (i.MX8XQP) support

[Alexander Stein]

Hi,

this series adds initial support for the TQ TQMa8Xx series, namely
TQMa8XQP (imx8qxp based).
This series depends on [1] for the PWM reference.
The device tree is split into generic mba8xx.dtsi and tqma8xx.dtsi which
can be used for both imx8qxp and (yet to be written) imx8dxp based
hardware.

Best regards,
Alexander

[1] https://lore.kernel.org/linux-arm-kernel/20230424082108.26512-1-alexander.stein@ew.tq-group.com/

Alexander Stein (3):
  dt-bindings: arm: add TQMa8Xx boards
  arm64: dts: freescale: add initial device tree for TQMa8XQP with
    i.MX8QXP
  arm64: defconfig: Enable i.MX8QXP device drivers

 .../devicetree/bindings/arm/fsl.yaml          |  17 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts |  16 +
 .../boot/dts/freescale/imx8qxp-tqma8xqp.dtsi  |  14 +
 arch/arm64/boot/dts/freescale/mba8xx.dtsi     | 485 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/tqma8xx.dtsi    | 263 ++++++++++
 arch/arm64/configs/defconfig                  |   4 +
 7 files changed, 800 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/mba8xx.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/tqma8xx.dtsi

-- 
2.34.1