[PATCH] ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT
Christian Lamparter
chunkeey at gmail.com
Mon Jun 5 14:23:35 PDT 2023
On Mon, Jun 5, 2023 at 8:11 AM Rafał Miłecki <zajec5 at gmail.com> wrote:
> From: Rafał Miłecki <rafal at milecki.pl>
>
> Move code added by Christian to the bcm-ns.dtsi which uses dual
> licensing. That syncs more Northstar code to be based on the same
> licensing schema.
>
> Cc: Christian Lamparter <chunkeey at gmail.com>
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
> ---
> Florian: we need to ask & wait for Christian's Acked-by before applying
> this one.
Acked-by: Christian Lamparter <chunkeey at gmail.com>
> ---
> arch/arm/boot/dts/bcm-ns.dtsi | 21 +++++++++++++++++++++
> arch/arm/boot/dts/bcm5301x.dtsi | 23 -----------------------
> 2 files changed, 21 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm/boot/dts/bcm-ns.dtsi b/arch/arm/boot/dts/bcm-ns.dtsi
> index 793891f1f260..d9455b33adee 100644
> --- a/arch/arm/boot/dts/bcm-ns.dtsi
> +++ b/arch/arm/boot/dts/bcm-ns.dtsi
> @@ -182,6 +182,10 @@ pcie1: pcie at 13000 {
> reg = <0x00013000 0x1000>;
> };
>
> + pcie2: pcie at 14000 {
> + reg = <0x00014000 0x1000>;
> + };
> +
> usb2: usb2 at 21000 {
> reg = <0x00021000 0x1000>;
>
> @@ -274,6 +278,14 @@ gmac3: ethernet at 27000 {
> };
> };
>
> + pwm: pwm at 18002000 {
> + compatible = "brcm,iproc-pwm";
> + reg = <0x18002000 0x28>;
> + clocks = <&osc>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> mdio: mdio at 18003000 {
> compatible = "brcm,iproc-mdio";
> reg = <0x18003000 0x8>;
> @@ -299,6 +311,15 @@ ports {
> };
> };
>
> + uart2: serial at 18008000 {
> + compatible = "ns16550a";
> + reg = <0x18008000 0x20>;
> + clocks = <&iprocslow>;
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> dmu-bus at 1800c000 {
> compatible = "simple-bus";
> ranges = <0 0x1800c000 0x1000>;
> diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
> index 0f40812eb5a4..600a1b54f2ae 100644
> --- a/arch/arm/boot/dts/bcm5301x.dtsi
> +++ b/arch/arm/boot/dts/bcm5301x.dtsi
> @@ -69,20 +69,6 @@ periph_clk: periph_clk {
> };
> };
>
> - axi at 18000000 {
> - pcie2: pcie at 14000 {
> - reg = <0x00014000 0x1000>;
> - };
> - };
> -
> - pwm: pwm at 18002000 {
> - compatible = "brcm,iproc-pwm";
> - reg = <0x18002000 0x28>;
> - clocks = <&osc>;
> - #pwm-cells = <3>;
> - status = "disabled";
> - };
> -
> mdio-mux at 18003000 {
> compatible = "mdio-mux-mmioreg", "mdio-mux";
> mdio-parent-bus = <&mdio>;
> @@ -110,15 +96,6 @@ usb3_dmp: syscon at 18105000 {
> reg = <0x18105000 0x1000>;
> };
>
> - uart2: serial at 18008000 {
> - compatible = "ns16550a";
> - reg = <0x18008000 0x20>;
> - clocks = <&iprocslow>;
> - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> - reg-shift = <2>;
> - status = "disabled";
> - };
> -
> i2c0: i2c at 18009000 {
> compatible = "brcm,iproc-i2c";
> reg = <0x18009000 0x50>;
> --
> 2.35.3
>
More information about the linux-arm-kernel
mailing list