[PATCH v2 10/10] arm64: dts: qcom: Add the support of cpufreq on SDX75

[Rohit Agarwal]

Add the support of cpufreq to enable the cpufreq scaling
on SDX75 SoC. Also add CPU specific information to build
energy model for EAS.

Signed-off-by: Rohit Agarwal <quic_rohiagar at quicinc.com>
---
 arch/arm64/boot/dts/qcom/sdx75.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
index 47170ae..e1887a4 100644
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -47,10 +47,14 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			L2_0: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -64,10 +68,14 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			power-domains = <&CPU_PD1>;
 			power-domain-names = "psci";
 			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			L2_100: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -78,10 +86,14 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			power-domains = <&CPU_PD2>;
 			power-domain-names = "psci";
 			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			L2_200: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -92,10 +104,14 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			power-domains = <&CPU_PD3>;
 			power-domain-names = "psci";
 			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
 			L2_300: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -605,6 +621,20 @@
 			};
 
 		};
+
+		cpufreq_hw: cpufreq at 17d91000 {
+			compatible = "qcom,sdx75-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>;
+			reg-names = "freq-domain0";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GPLL0>;
+			clock-names = "xo",
+				      "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
 	};
 
 	timer {
-- 
2.7.4