[PATCH net-next 08/30] net: dsa: mt7530: change p{5,6}_interface to p{5,6}_configured

Russell King (Oracle) linux at armlinux.org.uk
Sun Jun 4 06:07:07 PDT 2023


On Sun, Jun 04, 2023 at 03:55:17PM +0300, Vladimir Oltean wrote:
> On Sun, Jun 04, 2023 at 01:18:04PM +0100, Russell King (Oracle) wrote:
> > I don't remember whether Vladimir's firmware validator will fail for
> > mt753x if CPU ports are not fully described, but that would be well
> > worth checking. If it does, then we can be confident that phylink
> > will always be used, and those bypassing calls should not be necessary.
> 
> It does, I've just retested this:
> 
> [    8.469152] mscc_felix 0000:00:00.5: OF node /soc/pcie at 1f0000000/ethernet-switch at 0,5/ports/port at 4 of CPU port 4 lacks the required "phy-handle", "fixed-link" or "managed" properties
> [    8.494571] mscc_felix 0000:00:00.5: error -EINVAL: Failed to register DSA switch
> [    8.502151] mscc_felix: probe of 0000:00:00.5 failed with error -22

... which isn't listed in dsa_switches_apply_workarounds[], and
neither is mt753x. Thanks.

So, that should be sufficient to know that the CPU port will always
properly described, and thus bypassing phylink in mt753x for the CPU
port should not be necessary.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!



More information about the linux-arm-kernel mailing list