[PATCH 03/10] dt-bindings: dma: convert bcm2835-dma bindings to YAML

Stefan Wahren stefan.wahren at i2se.com
Sun Jun 4 05:12:16 PDT 2023


Convert the DT binding document for bcm2835-dma from .txt to YAML.
Since brcm,dma-channel-mask is considered deprecated use the
generic property.

Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
---
 .../bindings/dma/brcm,bcm2835-dma.txt         | 83 ----------------
 .../bindings/dma/brcm,bcm2835-dma.yaml        | 98 +++++++++++++++++++
 2 files changed, 98 insertions(+), 83 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
 create mode 100644 Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml

diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
deleted file mode 100644
index b6a8cc0978cd..000000000000
--- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-* BCM2835 DMA controller
-
-The BCM2835 DMA controller has 16 channels in total.
-Only the lower 13 channels have an associated IRQ.
-Some arbitrary channels are used by the firmware
-(1,3,6,7 in the current firmware version).
-The channels 0,2 and 3 have special functionality
-and should not be used by the driver.
-
-Required properties:
-- compatible: Should be "brcm,bcm2835-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain the DMA interrupts associated
-		to the DMA channels in ascending order.
-- interrupt-names: Should contain the names of the interrupt
-		   in the form "dmaXX".
-		   Use "dma-shared-all" for the common interrupt line
-		   that is shared by all dma channels.
-- #dma-cells: Must be <1>, the cell in the dmas property of the
-		client device represents the DREQ number.
-- brcm,dma-channel-mask: Bit mask representing the channels
-			 not used by the firmware in ascending order,
-			 i.e. first channel corresponds to LSB.
-
-Example:
-
-dma: dma at 7e007000 {
-	compatible = "brcm,bcm2835-dma";
-	reg = <0x7e007000 0xf00>;
-	interrupts = <1 16>,
-		     <1 17>,
-		     <1 18>,
-		     <1 19>,
-		     <1 20>,
-		     <1 21>,
-		     <1 22>,
-		     <1 23>,
-		     <1 24>,
-		     <1 25>,
-		     <1 26>,
-		     /* dma channel 11-14 share one irq */
-		     <1 27>,
-		     <1 27>,
-		     <1 27>,
-		     <1 27>,
-		     /* unused shared irq for all channels */
-		     <1 28>;
-	interrupt-names = "dma0",
-			  "dma1",
-			  "dma2",
-			  "dma3",
-			  "dma4",
-			  "dma5",
-			  "dma6",
-			  "dma7",
-			  "dma8",
-			  "dma9",
-			  "dma10",
-			  "dma11",
-			  "dma12",
-			  "dma13",
-			  "dma14",
-			  "dma-shared-all";
-
-	#dma-cells = <1>;
-	brcm,dma-channel-mask = <0x7f35>;
-};
-
-
-DMA clients connected to the BCM2835 DMA controller must use the format
-described in the dma.txt file, using a two-cell specifier for each channel.
-
-Example:
-
-bcm2835_i2s: i2s at 7e203000 {
-	compatible = "brcm,bcm2835-i2s";
-	reg = <	0x7e203000 0x24>;
-	clocks = <&clocks BCM2835_CLOCK_PCM>;
-
-	dmas = <&dma 2>,
-	       <&dma 3>;
-	dma-names = "tx", "rx";
-};
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml
new file mode 100644
index 000000000000..a09000a8131f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/brcm,bcm2835-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 DMA controller
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz at kernel.org>
+
+description:
+  The BCM2835 DMA controller has 16 channels in total. Only the lower
+  13 channels have an associated IRQ. Some arbitrary channels are used by the
+  VideoCore firmware (1,3,6,7 in the current firmware version). The channels
+  0, 2 and 3 have special functionality and should not be used by the driver.
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    const: brcm,bcm2835-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Should contain the DMA interrupts associated to the DMA channels in
+      ascending order.
+    minItems: 1
+    maxItems: 16
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 16
+
+  '#dma-cells':
+    description: The single cell represents the DREQ number.
+    const: 1
+
+  dma-channel-mask:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - dma-channel-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller at 7e007000 {
+      compatible = "brcm,bcm2835-dma";
+      reg = <0x7e007000 0xf00>;
+      interrupts = <1 16>,
+                   <1 17>,
+                   <1 18>,
+                   <1 19>,
+                   <1 20>,
+                   <1 21>,
+                   <1 22>,
+                   <1 23>,
+                   <1 24>,
+                   <1 25>,
+                   <1 26>,
+                   /* dma channel 11-14 share one irq */
+                   <1 27>,
+                   <1 27>,
+                   <1 27>,
+                   <1 27>,
+                   /* unused shared irq for all channels */
+                   <1 28>;
+      interrupt-names = "dma0",
+                        "dma1",
+                        "dma2",
+                        "dma3",
+                        "dma4",
+                        "dma5",
+                        "dma6",
+                        "dma7",
+                        "dma8",
+                        "dma9",
+                        "dma10",
+                        "dma11",
+                        "dma12",
+                        "dma13",
+                        "dma14",
+                        "dma-shared-all";
+        #dma-cells = <1>;
+        dma-channel-mask = <0x7f35>;
+    };
+
+...
-- 
2.34.1




More information about the linux-arm-kernel mailing list